DBD-16X MINI REBAR BENDER Tool Manual DBD-Series 0-180 degree Rebar Benders BN Products-USA, LLC. 3450 Sabin Brown Road Wickenburg, AZ 85390 (800) 992-3833 • (928) 684-2813 FAX: (928) 684-7041 mail@bnproducts.com • www.bnrebartools.
NOTE: When using electric tools, basic safety precautions should always be followed to reduce the risk of electric shock and personal injury, including the followings items: READ ALL INSTRUCTIONS AND SAVE THEM FOR FURTURE REFERENCE 1. Keep hands away. From all moving parts and rollers while operating. 2. Dress properly. Loose clothing or jewelry can get caught in moving parts. Wear sturdy boots with non-skid soles. Steel toed boots and safety glasses are recommended. 3. Keep children and bystanders away.
DBD-16X Mini Rebar Bender 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Moving bending roller Center roller Adjustable stopper Main switch Pilot lamp Operation button On/Off Angle setter (dial type) Angle stopper (two) Emergency stop button Plug-in for foot switch Roller set Foot Operated Switch SPECIFICATIONS Model Max.
WARNING: ALWAYS UNPLUG THIS TOOL BEFORE ATTACHING OR REMOVING ROLLERS OR ACCESSORIES. 1. Select and set the correct rollers for the bars to be bent. See the table. 2. Plug the electrical power cord into an appropriate outlet. 3. Lay the bar on the machine surface between the center roller and bending roller. Adjust the stopper so that the bar is parallel to the front edge of the machine. 4. Turn the main switch on and check that the pilot lamp has lit up. 5. Set the angle and make a test bend.
INSPECTION AND MAINTENANCE WARNING: ALWAYS UNPLUG TOOL BEFORE PERFORMING MAINTENANCE. DO NOT USE PARTS OR ACCESSORIES THAT ARE NOT GENUINE DIAMOND BRAND from BN Products-USA 1. At least once a month remove the bottom plate and grease all the visible gears and pinions. At the same time, check the carbon brushes for wear or damage. Replace with new brushes if they are worn out. 1C1961A Carbon Brush 2. Check that there are no loose nuts and bolts before starting the operation. 3.
DBD-16X Bender Manual | Page 6
No. Part No. Part Name Qty No. Part No. Part Name 1 1BL9402301 SWIVEL SHAFT 1 41 760/32ZZ BALL BEARING 60/322ZZ Qty 2 2 1BL9302100 MAIN SHAFT 1 42 1BL9402200 BEARING COLLAR 1 3 1BL9100105 FRAME 1 43 7SRH58 SNAP RING H58 1 4 1BL9404400 ANGLE GEAR (B) 1 44 1BL9403000 ARM STOPPER 1 5 7PB2.3025 TAPPING SCREW M2.
No. Part No. Part Name Qty No. Part No. Part Name 75 76900ZZ 76 76004ZZ 77 BALL BEARING 6900ZZ 1 112 7UB2W05012 1 SET BOLT WITH WASHER M5X12 3 BALL BEARING 6004ZZ 7SRS25 SNAP RING S25 1 114 7P204010 4 78 1BL9401702 GEAR NO. 3 1 SCREW WITH WASHER M4X10 79 1BL9401901 KEY NO. 5 1 115 7UB2W06012 SET BOLT WITH WASHER M6X12 8 117 1BL9204902 CONTROL PANEL 1 119 7BN25F10 ORERATION SWITCH 1 120 7S2701B01 SOCKET FOR FOOT SWITCH 1 80 Qty 1BL9401800 PINION NO.
