Specifications

38
SYSTEM Command
AT
BT의 UART Tx/Rx Path Test
ATZ
BT Soft Reset
AT&F
BT Factory Reset
AT+BTUART=B,P,S
UART Setting
230400,N,1
AT+BTUART?
UART information
AT+BTNAME=xxx
BT Local Name Setting
BnCOM Dual
Module
AT+BTNAME?
BT Local Name information
AT+BTADDR?
BT Mac Address information
AT+VERSION?
F/W Version information
AT+DISCONNECT
Disconnect device
(In case of AT Command mode)
AT+REMOTEMAC?
Connected device Mac Address information
AT+SCANMODE=n
BT Searchable Setting
1
AT+SCANMODE?
BT Searchable information
Classic Command(SPP)
AT+PAIRCLEAR
Initialize Paring Device Storage
AT+BTAUTOCON=e,n,s
Settings related to repeated connection
attempts in BT
0,10,20
AT+BTAUTOCON?
Check the settings related to repeated
connection attempts in BT
AT+CONNECT
BT SPP connection, last connected device
AT+CONNECTMAC=n,xxxx
Connect with BT-designated Mac Address
device
AT+CONNECTMAC?
All Mac Address information registered in
BT
AT+BTINQUIRY=E,T,N
SSP device discovery
AT+BTPINCODE=xxxx
PIN Code Setting
0000
AT+BTPINCODE?
PIN Code information
AT+BTSSP=n
Simple Secure Pairing mode setting
1(SSP Mode)
AT+BTSSP?
Simple Secure Pairing mode information
AT+BTSSPMODE=n
SSP Security Authentication setting
0(Just_Work)
AT+BTSSPMODE?
SSP Security Authentication information
AT+BTNUMACC
Numeric Comparison Mode certification
AT+BTPASSKEY
Passkey Entry Mode certification
iAP Command
AT+IAPMODEL=xxxx
IAP Model Name setting
BCM-DC100-AS
AT+IAPMODE?
IAP Model Name information
AT+IAPACCESSORY=xxxx
IAP Accessory Name setting
BCM-DC100-AS
AT+IAPACCESSORY?
IAP Accessory Name information
AT+IAPPROSTR=xxxx
IAP protocol String setting
com.bncom.protocol