Faucet Parts & Accessories IMPORTANT: Before installing your new faucet, make certain you have all working parts, as indicated below in the diagram.
Product Information Product Dimensions 3
Installation Instructions Step 1 2” (50.8mm) The deck hole should be 1 3/8” (35mm) and the deck thickness should be no more than 2” (50.8mm). Step 2 Install the faucet through the deck mounting hole. Be sure to align the faucet in the direction desired.
Installation Instructions Step 3 1 2 4 3 Install the plastic base (1), gasket (2) and washer (3). Make sure the plastic base is installed with the flat side facing the deck. Next, install the metal base clamp (4). Step 4 1 Use the provided screws by screwing them into the metal base clamp (1). Screw them tightly without stripping the screw heads.
Installation Instructions Step 5 1 2 Securely attach both HOT (1) and COLD (2) water hoses to the faucet. Step 6 1 1 Connect the water hoses (1) onto the water valves (we recommend to use plumbers tape to prevent leakage). Turn on water valves.
Installation Instructions Step 7 Enjoy the use of your faucet! Note: A small amount of water may run from the spout or drip for a very short period after the faucet is shut off. This is a natural occurrence caused by long, flexible hoses.
Boann Manufacturer Warranty All Boann products are manufactured and tested with the highest quality standards and rigorous quality control process. This warranty is limited to the non-commercial use of Boann products purchased and installed in the United States and Canada.
Boann Manufacturer Warranty responsible for any default breakage, or damages caused thereby or resulting thereof, either directly or indirectly. This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Boann and all applicable rules, regulations, and legislation pertaining to such installations. This warranty does not apply to Commercial or Industrial applications of Boann products.