User Manual

To Pair The Subwoofer
OPERATION
1. To power on the SoundBar and Subwoofer, connect both to an AC power source. The blue LED
pairing indicator on the back of the unit will begin to ash slowly (meaning that it has switched
on). Use a small pin to press the WPS auto pair button. The subwoofer will enter pairing mode and
the blue LED indicator will begin to ash quickly as a sign of this.
2. Power-on the boAt Aavante Bar 2050 and press the power/standby button to put the Soundbar
into pairing mode.
3. Within 30 seconds, the ashing blue LED indicator will stabilize indicating that the subwoofer
has paired with the SoundBar.
4. The SoundBar and Subwoofer will pair automatically after having been connected successfully
the rst time.
Please note: The subwoofer will automatically enter standby mode within 5 minutes of being
turned on if it has not been connected to the SoundBar. The LED light will switch from a blinking
blue to a solid red meaning that the Subwoofer is in standby mode. To avoid wireless signal
interference, please keep the system at an appropriate distance from other 2.4 GHz wireless
devices
Bluetooth Mode
1. Power-on the boAt Aavante Bar 2050 and Subwoofer. This can be done by pressing the Standby
button on the side of the Soundbar or on the remote control. The LCD display will showcase “bt
(Bluetooth)” ashing steadily.
2. Turn on Bluetooth on your phone and search for available devices within range, select boAt
Aavante Bar 2050.
3. If a password is asked for, enter “0000.”
4. Playing/pausing tacks, controlling volume and the choosing of tracks can all be done from your
connected device; there is no need to interact with the SoundBar. The remote control can also be
used at this time.
Please note:
For Apple products, you can raise the volume on your SoundBar and vice versa using the volume
option on your Apple device. When an android device is connected, you will need to adjust the
SoundBar’s and the device’s volume separately.
Optical Mode
Optic cable ports are fairly common amongst Digital set-top boxes, TV’s, game consoles and DVD
players, here is how to get your optical cord connected and going.
1. Power on the Aavante Bar 2050 by connecting it to an AC power source and pressing the
standby mode. You can use either the SoundBar unit or the remote control (input) to switch to
Optical mode.
2. Use a digital optical cable to connect the SoundBar to the sound source. The volume level on
both the SoundBar and your connected device will work independantly and will have to be
adjusted as such.