User Manual

HDMI Mode
1. The boAt Aavante Bar 2050 can be connected to devices through an ARC (Audio Return
Channel) enabled HDMI port and is fairly common now. It allows for both video and audio output
through the same connection. Using either the buttons on the SoundBar or the “Input” button on
the remote, you can activate HDMI mode once the SoundBar has been switched on.
2. Connect a HDMI cable to your sound bar and the other end to your device to activate the HDMI
ARC. Your TV should have a label near the port indicating whether it is HDMI ARC or not. If it
cannot be seen, please refer to your TV manual to conrm and whether it requires manual
activation or not.
3. Please ensure that an HDMI ARC port is in use, it is mandatory for the eective functioning of
the SoundBar through this particular option.
USB Mode
Plug in your pendrive after switching the SoundBar on, the unit will automatically read through
the les and begin playing music.
2. Music playback can be controlled from the buttons on the SoundBar – Volume, Play/pause,
change tracks.
3. Simply remove the USb if you wish to exit this mode, or utilize the Soundbar buttons or the
Input button on the remote to change the mode. The indicator for USB mode on the SoundBar is
“USB” , this will be displayed on the tiny in-built LCD screen.
Please note: Up 32 GB USB drives containing MP3 le formats are compatible with the SoundBar
AUX Mode
1. Use a 3.5mm AUX jack to connect any device you intend to use with the boAt Aavante Bar
2050. Using either the buttons on the SoundBar or the “Input” button on the remote, you can
locate and activate AUX mode.
2. Please ensure that the SoundBar has been switched on before beginning the above mentioned
step.
3. Playback functions (play/pause, volume, tracks) cannot be adjusted through the SoundBar
remote when in Aux mode. It can only be done through the Bluetooth connected device.