User's Manual

4
CAUTIO N: READ ALL WARNINGS BEFORE USING OR ATTEMPTING ANY WORK ON
YOUR MARKER. SHOULD YOU BE UNSURE AT ANY POINT, STOP AND SEEK
PROFESSIONAL SUPPORT.
Introducing the G6R
The sixth generation Intimidator platform, G6R, brings new advances to the stacked tube poppet
valve marker. These advances include the front/rear split body and internally routed, macroline
free air channels. The front/rear split enables more choices in milling, internal air routing, and
weight reduction than standard one piece designs. Internally routed air channels prevent the
failures possible in macroline systems and allow more hand positioning options for YOU when
switching hands. The G6R is designed, machined, and built in the USA.
Ready for the Field
While the G6R is tournament ready out of the box, certain components may be upgraded for
increased performance.
Stock
Available Upgrade
Feedneck
LeverLock
n/a
Control Board
Tadao Odoshi
Tadao Ebisu
Eyes
2C
4C
Bolt
Dust Resistant (DR) Bolt
Pillow Bolt
Amount of Time
Estimated
Cases of paint
Recommended Upkeep
While talking smack with
your friends in between
games
meh
• Remove the bolt and barrel
• Run a clean swab through the firing chamber
• Put a drop of oil on the bolt o-rings if your
friends are still failing to get on the field
• Reinstall bolt
After a day of play
1-2 Cases
• Repeat above steps
• Wipe down marker outside
• Clean and oil bolt
After a Weekend
2-4 Cases
• Repeat above steps
• Remove the Ram Cap and Ram
• Clean debris and old grease from ram
interior
• Inspect o-rings for damage
• Clean and grease ram
A Month
10 Cases
• Repeat above steps
• Clean, inspect, and grease HPR Piston o-ring
6 Months or when
consistency issues appear
20 Cases
• Clean, inspect, and grease LPR Piston o-ring
• Clean, inspect, and grease poppet shaft o-
ring