Specification Sheet

Company address: Contact information:
Bob Smith Industries, Inc.
8060 Morro Road
Atascadero, CA 93422
Telephone: [phone]
MEDICAL EMERGENCY Phone: Poison Control Center
1-877-671-4608 (toll free) or 1-303-592-1711
TRANSPORT EMERGENCY Phone: CHEMTREC
1-800-424-9300 (toll free) or 1-703-527-3887
www.bsi-inc.com
!
Safety Data Sheet
Revision Number: 02.0 Issue date: 05/21/2015
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: Foam-Cure™ IDH number: 141-142
Product type: Silicon Adhesive Item number: 141-142
Restriction of Use: None identified Region: United States
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
WARNING: FLAMMABLE LIQUID.
IRRITATING TO EYES AND SKIN
MAY CAUSE TEARING IN EYES
MAY CAUSE LIVER AND KIDNEY DAMAGE
HAZARD CLASS
HAZARD CATEGORY
FLAMMABLE LIQUID
2
EYE AND SKIN IRRTITANT
2
PICTOGRAM(S)
Precautionary Statements
Prevention: Keep away from heat, sparks, open flames. No smoking. Avoid breathing vapors.
Wash thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear
protective gloves, eye protection and face protection.
Response: IF ON SKIN: Wash with soap and water. Prolonged contact may cause dermatitis.
. IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse with water
for several minutes. If eye irritation persists: Get medical
attention. In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
IF INGESTED: Do not induce vomiting. Drink water/milk. Get immediate medical aid.
Storage: Store in a well-ventilated place. Keep container tightly closed.
Keep in a cool and dark area.
Disposal: Dispose of contents and/or container according to Federal, State/Provincial
and local governmental regulations.
H-
1, F-3, R-0
Classification complies with OSHA Hazard Communication Standard (29 CFR 1910.1200) and is consistent with the provisions of
the United Nations Globally Harmonized System of Classification and Labeling of Chemicals (GHS).
Item number: 141-142 Product name: Foam-Cure™
Page 1 of 5
sds_foam_cure.pdf 1 9/11/15 2:20 PM