User's Manual

ManualsBrandsBOBCAT ManualsComputers & AccessoriesBobcat IoT hotspot

Bobcat Miner 300 User Manual

Brand Name: BOBCAT

Product Name: Bobcat IoT hotspot

Model Name: Bobcat Miner 300

Manufacture: Chengdu Just Do It Information and Technology Co., Ltd.

Supported services and functions:

BT5.1+EDR/BLE

Frequency band: 2402 - 2480 MHz

Antenna type: PCB Antenna

Antenna Gain: 1dBi

2.4G WIFI

Operation Frequency: 802.11b/g/n(20MHz): 2412~2472MHz

Antenna type: PCB Antenna

Antenna Gain: 1dBi

LoRa:

Operation Frequency: 863MHz~870MHz

Antenna type: External antenna

Antenna Gain: 4dBi

Max average out put power in Watt (TP)

BT:9.64 dBm=0.0092(W)

BLE: 9.6dBm=0.0091(W)

2.4G WLAN: 12.69dBm=0.0186(W)

LongFi: 12.88dBm=0.0194(W)

Summary of content (6 pages)

PAGE 1
Bobcat Miner 300 User Manual Brand Name: BOBCAT Product Name: Bobcat IoT hotspot Model Name: Bobcat Miner 300 Manufacture: Chengdu Just Do It Information and Technology Co., Ltd. Supported services and functions: BT5.1+EDR/BLE Frequency band: 2402 - 2480 MHz Antenna type: PCB Antenna Antenna Gain: 1dBi 2.4G WIFI Operation Frequency: 802.
PAGE 2
Introduction Bobcat Miner 300 is a high-efficiency hotspot. It is compatible with the leading wireless LongFi protocol. The Bobcat Miner 300 is also compatible with all LongFi devices. The Bobcat Miner 300 runs on ultra-low power consumption (5W) and its signal rangecan cover up to 10+ miles, providing connectivity to tens of thousands of LongFi end nodes detected within its range.
PAGE 3
Instruction BT Power Button LoRa Ethernet antenna 1. Take out the Bobcat Miner 300 and accessories from the package, install the LoRa antenna and hanger, you can put the device directly on a stable desktop or hang it on a solid wall. 2. If you will use a wired network on this device, please plug the network cable into the ETHERNET connector. If you use WiFi, please configure it in the mobile APP in the next steps.. 3. Turn on the Bluetooth and GPS function of the mobile phone. 4.
PAGE 4
Dimensions Package Content
PAGE 5
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.
PAGE 6
IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation issubject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may causeundesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareilsradio exempts de licence.