Operating instructions

T190 Compact Track Loader
31 Operation & Maintenance Manual
STARTING THE ENGINE (CONT’D)
Keyless
WARNING
AVOID INJURY OR DEATH
• Engines can have hot parts and hot exhaust gas.
Keep flammable material away.
• Do not use machines in atmosphere containing
explosive gas.
W-2051-1086
Perform the PRE-STARTING PROCEDURE. (See PRE-
STARTING PROCEDURE on Page 27.)
Figure 62
Set the engine speed control at the 1/2 speed position
[Figure 58].
NOTE: Loaders with Keyless Instrument Panel have a
permanent, randomly generated Master
Password set at the factory. Your loader will
be assigned an Owner Password. Your dealer
will provide you with this password. Change
the password to one that you will easily
remember to prevent unauthorized use of
your loader. (See Passwords on Page 116.)
Keep your password in a safe place for future
needs.
Figure 63
Use the numeric keypad (1) [Figure 63] to enter the
password, then press the RUN / ENTER Button (2)
[Figure 63].
If the temperature is cold, the intake air heater will
automatically cycle and the Icon (3) [Figure 63] will be
ON.
When the Icon light goes OFF, press the START
Button (4) [Figure 63]. Release the button when the
engine starts.
NOTE: Make sure both hand controls (ACS) or
Joysticks (SJC) are in the neutral position
before starting the engine. Do not move the
levers or joysticks from the neutral position
before attempting to start the engine.
If controls are moved:
a. The neutral position for the hydraulic valve
spool and hand control may not be correctly
calibrated. This can result in movement of the lift
or tilt hydraulic cylinders when the hand control
lever is returned to the neutral position after
start-up.
OR
b. ACS indicator light (5) [Figure 63] on right
instrument panel will be ON.
If either condition occurs, press the STOP
button (6) [Figure 63]
. Put the controls in neutral
position and re-start the engine.
P-68134
B-15553B
B-22153
1
2
4
6
5
3