Specification Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/30/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
X
L
3/4''
19mm
Square
2"
50mm
Typ.
3-1/4''
85mm
1/2''
13mm
Finish Face
of Wall
S
S
Concealed Wall Plate
Setscrew
Flange and
Mounting Bracket
Support Arm
Y
B-673 Bright polished stainless steel
B-6737 Satin-finish stainless steel
Specify Model Required:
MATERIALS:
Flanges and Support Arms (2) — 18-8, type-304, 22-gauge (0.8mm) stainless steel. Each flange has concealed, 16-gauge
(1.6mm) stainless steel mounting bracket. All-welded construction. Secured to wall plates with stainless steel locking
set-screws.
Concealed Wall Plates (2) — 18-8, type-304, 16-gauge (1.6mm) stainless steel.
Towel Bar — 18-8, type-304, heavy-gauge stainless steel. Lockseam rolled, 3/4" (19mm) square tubing.
INSTALLATION:
To remove concealed wall plates from back of flanges and mounting brackets, loosen locking setscrews. Mount each wall
plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage
mounting brackets onto prongs of wall plates, then secure into position by tightening locking setscrews at bottom of flanges.
Note: Centerline-to-centerline of concealed wall plates must be within 1/16" (1.6mm) of the Y dimension given.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished,
or provide 1/8" (3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Surface-mounted towel bar shall be type-304 stainless steel with ____________________ (insert one: bright polished or satin)
finish. Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting
brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with locking setscrews. Towel bar shall be 3/4" (19mm)
square tubing.
Surface-Mounted Towel Bar shall be Model _______________ (insert model number) of Bobrick Washroom
Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom
Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick
Washroom Equipment Limited, United Kingdom.
Bar
Length
L
Overall
Length
X
Model
No.
STANDARD STOCK SIZES
Centerline-
to-Centerline
Y
B-673 x 18 18'' (455mm) 19-5/8" (500mm) 17-5/8" (450mm)
B-673 x 24 24'' (610mm) 25-5/8" (650mm) 23-5/8" (600mm)
B-6737 x 24 24'' (610mm) 25-5/8" (650mm) 23-5/8" (600mm)
SURFACE-MOUNTED
TOWEL BAR
B-673
B-6737