Specification

Technical Data
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 12/22/16
R/B, S/G
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2016 by Bobrick Washroom Equipment, Inc.
4''
100mm
3''
75mm
2-1/8''
55mm
4''
100mm
Maximum
Mounting
Thickness
2-1/16''
50mm
Dia.
14-5/8''
370mm
9-9/16''
245mm
3-5/16''
85mm
Dia.
Lavatory or
Countertop
MATERIALS:
Piston, Spout, and Top Cover — Type-304 stainless steel with bright polished finish.
Cover Spacer — Rigid, impact-resistant polyester.
Escutcheon — Chrome-plated, high-impact-resistant ABS with bright polished finish. Concealed locking mechanism.
Body and Shank — High-impact-resistant plastic.
Valve — ABS cylinder. Stainless steel spring. U-packing seal and duckbills.
Container — Translucent, shatter-resistant polyethylene. Capacity: 34-fl oz (1.0-L).
OPERATION:
Press piston down to dispense commercially marketed all purpose hand soaps. Vandal-resistant spout can rotate 360° without damage
to unit. Escutcheon locks to body with concealed locking mechanism that is opened with special key provided. To fill from top, unlock
cover and remove piston, spout, and supply-tube assembly. Unit may also be filled by removing container from below lavatory.
Designer's Note: Bobrick liquid soap dispensers are designed to dispense commercially marketed all purpose hand soaps including
liquid and lotion soaps and synthetic detergents.
INSTALLATION:
Unit is designed for installation in 1'' (25mm) diameter hole in porcelain-enameled steel, cast-iron or vitreous-china lavatories, as
well as in countertops adjacent to lavatories. Unit may be mounted in unused faucet hole or through special hole requisitioned when
lavatory is ordered from manufacturer (specify punching location). Shank accommodates maximum 4'' (100mm) mounting thickness
and can be cut in the field. Clearance required for container diameter is 3-3/8'' (85mm).
SPECIFICATION:
Lavatory-mounted soap dispenser shall dispense commercially marketed all-purpose hand soaps, non-iodine based soaps and do not
use alcohol based sensitizers. Piston and spout assembly shall be Type-304 stainless steel with bright polished finish. Spout shall
rotate 360° without damage to valve mechanism. Escutcheon shall lock to body with concealed locking mechanism that is opened with
special key provided. Piston, spout, and supply-tube assembly shall be removable from top for filling and maintenance. Valve shall be
equipped with plastic cylinder, stainless steel spring, U-packing seal, and duckbills. Shank shall accommodate mounting thicknesses
up to 4'' (100mm). Translucent, shatter-resistant polyethylene container shall have a capacity of 34-fl oz (1.0-L).
Lavatory-Mounted Soap Dispenser shall be Model B-822 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
LAVATORY-MOUNTED
SOAP DISPENSER
B-822