Specification Sheet
Technical Data
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Issued 1/26/21
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2021 by Bobrick Washroom Equipment, Inc.
continued . . .
COUNTER-MOUNTED
DESIGNER SERIES
AUTOMATIC FAUCET
B-887_
MATERIALS:
Spout Assembly — Spout is made of one-piece heavy-duty cast brass available in five different finishes. Built in IR sensor
with sophisticated automatic user detection and self-calibration ensures the user does not need to touch the faucet and helps
deliver optimum water savings. See Finishes below.
Finish Type Model No.
Polished Brass B-8870
Matte Black B-8872
Brushed Nickel B-8875
Polished Nickel B-8876
Polished Chrome B-8878
Aerator and Key — Use key to install aerator into spout.
Shank Mounting Kit — Below the sink, plastic shank and gasket secures spout assembly to counter.
Electronics Box with Solenoid — Controlled by IR sensor, opens and closes the flow of water to the unit. 4 “AA” Battery
Pack comes standard with unit and is housed in the Electronics Box.
Filter — Installed to bottom of electronics box and connects to water line to help prevent debris and other materials from
clogging unit or causing a malfunction.
Optional — 6V AC Adapter. For AC adapter option, must order both parts, part no. 8878-72 AC Power Converter and 8878-73
Inline Connector.
OPERATION:
To activate faucet, place hand under spout near the sensor for approximately 1 second. Water will flow from spout at a rate of 0.5
gallons per minute (GPM) for a specified length of time determined by the mode in which the device is set to. The default mode
is Sensing Mode where water will flow from spout until hands are removed from sensor or after automatic shut off time of 30
seconds.
Patented
B-8870 Polished Brass B-8875 Brushed Nickel
B-8872 Matte Black B-8876 Polished Nickel
B-8878 Polished Chrome
Specify Finish Required:
6-1/2''
164mm
1-3/4''
44mm
3-5/8''
93mm
Faucet Spout
w/ Sensor
Electronics Module
w/ Solenoid
3-7/16''
87mm
2-3/4''
69mm
4-3/8''
112mm