Installation Sheet

1
4
© 2021 by Bobrick Washroom Equipment, Inc.
Form No. 9806-9807-75_ii Issued 6/21/21 Printed in U.S.A.
In the U.S.A.: BOBRICK WASHROOM EQUIPMENT, INC.
Los Angeles: 6901 Tujunga Ave., North Hollywood, CA 91605-6213: Tel: [phone], FAX: [phone]
New York: 200 Commerce Drive, Clifton Park, NY 12065-1350; Tel: [phone], FAX: [phone],
or e-mail: [e-mail]
In Canada: BOBRICK WASHROOM EQUIPMENT COMPANY
45 Rolark Drive, Scarborough, Ontario M1R 3B1 • Eastern Canada: Tel: [phone] • FAX: [phone]
• Western Canada: Tel: [phone] • FAX: [phone]
BOBRICK.COM
Installation Instructions for Grab Bars
B-9806 and B-9807
no collection
NOTE:
For Installation on
a. Dry-Walls
b. Glass-Partitions and Metal Partitions as well as
c. “back-to-back-installation of two grab bars against each other from
opposite sides of partition-panels (glass and any other partition
material)
Please see separate installation instructions of respected installation kits.
Required Tools
a. Spanner (preferably ring end) 13mm (similar to ½")
b. Laser/Spirit level
c. Phillips head screwdriver
d. sixpcs.#10sheetmetalscrews,athead,stainlesssteel,length 
depending on application (e.g. 1/2" length for 1/2" CL-partitions and 1”
length for 1” thick particle board)