Specification Sheet

continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Issued 5/18/21 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2021 by Bobrick Washroom Equipment, Inc.
Technical Data
Recommended Mounting Height Off Floor
29-1/2'' 750mm
S
38.10mm
(1-1/2") Dia.
24.50mm
(1")
S
Bar
13mm
(1/2")
Finish Face of Wall
Mounting
Flange (2)
Flange
Cover (2)
Length+49mm(2")
Length
38.1mm
(1-1/2")
25
(1") Dia.
2 Plcs.
Length+49mm(2")
28.5mm
(1-1/8")
25.00mm
(1")
38.10mm
(1-1/2") Dia.
5.0mm (3/16") Mounting
holes, 3 Plcs. Equally
Spaced (120° apart)
on 38.0mm Dia. Bolt Circle
50
(2") Dia.
2 Plcs.
MATERIALS:
Grab Bar — Type 303, 14-gauge (2mm) stainless steel tubing with satin finish. 1-1/2" outside diameter. Clearance between the
grab bar and the wall is 1-1/2" (38.1mm).
Concealed Mounting Flanges — Type 303, 2/5" (10mm) thick, machined solid stainless steel with satin finish. End flanges 2"
(50mm) diameter with three holes for attachment to wall.
Flange Covers — Type 303, 1/8" (3mm) thick, machined solid stainless steel with satin finish. 2" (50mm) diameter. Each cover is
concealing the mounting screws.
Pillar — Tubing is connected to Mounting Flanges via a metric M8 hex screw, covered by a machined solid pillar, 1/8" (6mm) wall
thickness, 1" (25mm) outer diameter. Pillar is securing the flange covers against the mounting flange.
1½" (38mm) DIAMETER
STAINLESS STEEL GRAB BARS
WITH CONCEALED FLANGE
B-9806
SERIES
no collection