Specification Sheet

ManualsBrandsBobrick ManualsAccessoriesBobrick Wall Mounted Single Post Tissue Holder

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Issued 12/21/17 Printed in U.S.A.

Technical Data

NYLON

TOILET PAPER HOLDER

B-2716

MATERIAL:

Concealed Wall Plate — Polyamide 6 -ﬁberglass reinforced nylon with W1 White glossy ﬁnish. Two mounting screw holes

for attachment to wall.

Holder Housing — Polyamide 6 with W1 White glossy ﬁnish. Snaps over wall plate to conceal mounting screws. Secured to

Concealed Wall Plate with set screw.

Holder Bar — Polyamide 6, 20mm (3/4") diameter, rod with W1 White glossy ﬁnish. Secured to Holder Housing by ﬁrmly

pushing split, ﬂanged end of Holder Bar into the wall assembly, allowing for right or left-handed assembly.

INSTALLATION:

Remove Concealed Wall Plate from back of Toilet Paper Holder Housing with a ﬂat-blade screwdriver. Wall Plate may be used

as a template to mark locations of mounting screws on ﬁnished wall. Mount Concealed Wall Plate with oval shape in a horizon-

tal orientation with set screw on top.

Mount Wall Plate on ﬁnished wall; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an

S. Snap Toilet Paper Holder Housing onto Wall Bracket, covering the Wall Plate completely, with rear of Holder Housing up

against the wall. Orientation of Holder Housing may be selected to have the Toilet Paper Holder Bar engage the wall assembly

at either the left or right side.

Assemble the Toilet Paper Holder Bar into wall assembly by ﬁrmly pushing split, ﬂanged end of bar into the wall assembly at

the hole location side until it snaps into place, completely engaged.

For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts

and washers.

For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured.

For plaster or drywall construction, provide concealed backing to comply with local building codes, then secure unit with

sheet-metal screws furnished.

For other wall surfaces, provide ﬁber plugs or use expansion shields (furnished) for use with sheet-metal screws furnished by

manufacturer, or provide 1/8" (3mm) toggle bolts or expansion bolts.

CLEANING AND MAINTENANCE:

DO NOT USE abrasive liquid detergents. Chlorine bleach does not improve the aseptic aspect of the equipment and could lead

to opacity and deterioration of the material.

SPECIFICATION:

Toilet Paper Holder shall be polyamide 6 with glossy ﬁnish. Concealed Wall Plate shall be equipped with two mounting screw

holes for attachment to the wall. Toilet Paper Holder shall have Holder Housing to snap over Wall Plate to conceal mounting

screws. Toilet Paper Holder Bar shall be 3/4" (20mm) diameter, polyamide 6 -ﬁberglass reinforced nylon rod, secured to

housing by ﬁrmly pushing split, ﬂanged end of bar into the wall assembly, allowing for right- or left-handed assembly.

Nylon Toilet Paper Holder shall be Model B-2716 of Bobrick Washroom Equipment, Inc., Clifton Park, New York;

Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;

Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.

4-1/2''

115mm

4-3/4''

121mm

3/4''

20mm

Finish Face of Wall

1-9/16''

39mm

4-7/16''

112mm

2-7/16''

62.5mm

2-5/8''

67mm

5-7/8''

150mm

1-3/8''

35mm

1-9/16''

40mm

Set Screw

Notch

Wall Plate

Holder Housing

Holder Bar