Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Issued 4/7/17 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.
Technical Data
8-1/16"
205mm
4-1/2"
115mm
4-1/2"
115mm
3/8"
10mm
3-7/8"
100mm
2-1/16"
55mm
7-7/16"
190mm
4-9/16"
115mm
Finish Face of Wall
30" 760mm
Recommended Mounting Height Off Floor
for Universal Design
14-1/8"
360mm
TrimLineSeries™
SURFACE-MOUNTED
SANITARY NAPKIN
DISPOSAL
B-35139
MATERIALS:
Cabinet — 18-8, Type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin-fi nish.
Skirt — 18-8, Type-304, stainless steel with satin-fi nish.
Door — 18-8, Type-304, 20-gauge (0.9mm) stainless steel with satin-fi nish. Secured to cabinet with two rivets and equipped with a
magnet catch.
Waste Receptacle — 18-8, Type-304, heavy-gauge stainless steel. All-welded construction. Removable for servicing. Capacity: 0.6-gal.
(2.3-L).
OPERATION:
To service waste receptacle, unlatch door and remove waste container. Cable door-swing limiter prevents damage to washroom
accessories and walls.
INSTALLATION:
For partitions with particleboard or other solid core, secure with four #10 x 5/8" (4.8 x 16mm) sheet-metal screws (not furnished) at
points indicated by an S, or provide through-bolts, nuts, and washers.
For hollow-core metal partitions, provide solid backing into which sheet-metal screws can be secured. If two units are installed back-to-
back, then provide threaded sleeves and machine screws for the full thickness of partition.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal
screws.
For other wall surfaces, provide fi ber plugs or expansion shields for use with sheet-metal screws, or provide 3/16" (5mm) toggle bolts
or expansion bolts.
Replacement Parts:
Skirt Replacement Kit 35139-53
Waste Receptacle Replacement 35139-78
International Label 3533-44
SPECIFICATION:
Surface-mounted sanitary napkin disposal shall be Type-304 stainless steel with all-welded construction; exposed surfaces shall
have satin fi nish. Door shall be Type-304, 20-gauge (0.9mm) stainless steel with satin-fi nish. Secured to cabinet with two rivets and
equipped with a magnet catch and cable door-swing limiter. Waste receptacle shall be Type-304, heavy-gauge stainless steel. All-welded
construction with a capacity of 0.6-gal. (2.3-L).
Surface-Mounted Sanitary Napkin Disposal shall be Model B-35139 of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.