Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 4/4/13 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2013 by Bobrick Washroom Equipment, Inc.
Technical Data
S S
13''
330mm
18-15/16''
480mm
S S
11-1/16''
280mm
Recessed Cabinet
Disposal Panel
Door
Piano Hinge
Removable
Waste
Receptacle
9/16''
14mm
Finish Face of Wall
S
3-5/8''
90mm
1-7/8''
50mm
S
16-15/16''
430mm
Recommended Mounting Height Off Floor
For Universal/Accessible Design
30''
760mm
materials:
Cabinet — 18-8, type-304, stainless steel. All-welded construction.
Door — 18-8, type-304, 18-gauge (1.2mm) stainless steel with satin finish. 9/16" (14mm) 90° return for maximum rigidity.
Secured to cabinet with a concealed, full-length stainless steel piano-hinge.
Disposal Panel — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to door with a concealed,
full-length stainless steel piano-hinge. Self-closing panel has international graphic symbol identifying napkin disposal.
Waste Receptacle — Leak-proof rigid molded polyethylene. Removable for servicing. Capacity: 1.2-gal. (4.6-L).
operation:
Unit is equipped with self-closing panel covering disposal opening. Napkin disposal is emptied by opening door and removing
waste receptacle. Disposable paper liners for napkin receptacle are available as optional accessory: order Bobrick Part No.
353-12.
installation:
Provide framed rough wall opening 11-1/2" wide x 17-1/4" high (290 x 440mm). Minimum recessed depth required to finish
face of wall is 3-3/4" (95mm). Allow for construction features that may protrude into rough wall opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide
aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims
between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws
(not furnished).
specification:
Recessed sanitary napkin disposal shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have
satin finish. Door shall have 9/16" (14mm) 90° return and be equipped with a concealed, full-length stainless steel piano-hinge.
Napkin disposal shall have self-closing stainless steel panel covering receptacle opening. Panel shall be equipped with
full-length stainless steel piano-hinge and international graphic symbol identifying napkin disposal. Unit shall be furnished with
a removable, leakproof, molded polyethylene receptacle. Receptacle shall have a capacity of 1.2-gal. (4.6-L).
Recessed Sanitary Napkin Disposal shall be Model B-35303 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
Rough Wall Opening
11-1/2" (290mm) wide
17-1/4" (440mm) high
3-3/4" (95mm) minimum
recessed depth
recessed
sanitary napkin
disposal
B-35303