Specification Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-359 r10/30/14 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2014 by Bobrick Washroom Equipment, Inc.
Technical Data
12-3/4''
325mm
S
S
S
S
17-3/16''
435mm
10-7/8''
275mm
1''
25mm
Typ.
Lock & Key
Stainless
Steel Door
Paper Towel
Dispenser
Shelf
4''
100mm
2''
50mm
Finish Face of Wall
15-5/16''
390mm
Recommended Mounting Height Off Floor
66'' 1675mm
3/13''
5mm
Recommended Mounting Height Off Floor
For Accessible Design
51'' 1295mm
MATERIALS:
Cabinet — 18-8, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish.
Flange — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Drawn, one-piece, seamless construction.
Door — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Double-pan-back construction is warp-resistant.
Secured to cabinet with a welded, full-length stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter
and tumbler lock keyed like other Bobrick washroom accessories.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel. Dispenses C-fold or multifold paper towels.
Capacity: 350 C-fold or 475 multifold paper towels.
Shelf — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin finish.
Optional: Order Bobrick Part No. 369-130 TowelMate
®
Accessory Module has towel guide angle with 90 degree return to
prevent paper towels from falling forward out when door is opened for servicing. TowelMate Accessory Support Rod allows
dispenser to dispense paper towels one at a time without tabbing, tearing, bulging, sagging and bunching.
OPERATION:
Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment or use of adapters.
INSTALLATION:
Provide framed rough wall opening 11-1/4" wide x 15-5/8" high (285 x 395mm). Minimum recessed depth required to finish face
of wall is 4" (102mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall.
Coordinate with mechanical engineer to avoid pipes, vents, and conduits in wall. Mount unit in wall opening with shims between
framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (32mm) sheet-metal screws (not furnished by
manufacturer).
SPECIFICATION:
Recessed paper towel dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces have satin
finish. Flange shall be drawn, one-piece, seamless construction. Door shall be secured to cabinet with a welded, full-length,
stainless steel piano-hinge and equipped with a stainless steel cable door-swing limiter and tumbler lock keyed like other
Bobrick washroom accessories. Shelf shall be stainless steel with satin finish. Paper towel dispenser shall dispense 350 C-fold
or 475 multifold paper towels without additional adapters or trays.
Recessed Paper Towel Dispenser shall be Model B-359 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
RECESSED PAPER
TOWEL DISPENSER
B-359
Rough Wall Opening
11-1/4" (285mm) wide
15-5/8" (395mm) high
4" (102mm) minimum
recessed depth