Installation Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-35903 r3/1/21 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2021 by Bobrick Washroom Equipment, Inc.
Technical Data
13''
330mm
S S
S
18-15/16''
480mm
S
7''
180mm
11-1/16''
280mm
16-15/16''
430mm
Recommended Mounting Height Off Floor
66''
1675mm
Recommended Mounting Height Off Floor
For Accessible Design
51''
1295mm
Finish Face of Wall
1-7/8''
50mm
9/16''
14mm
S
3-5/8''
95mm
Door
Piano
Hinge
Paper Towel
Dispenser
TowelMate
Towel Guide
Bracket Return
TowelMate
Towel Rod
RECESSED PAPER
TOWEL DISPENSER
MATERIALS:
Cabinet — 18-8, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish.
Door — 18-8, type-304, 18-gauge (1.2mm) stainless steel. 9/16" (14mm) 90° return edges for maximum rigidity. Secured to
cabinet with a concealed, full-length stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and
friction catch.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) stainless steel. Capacity: 300 C-fold or 400 multifold paper
towels. TowelMate consisting of a 90° return towel guide angle inside cabinet to prevent paper towels from falling forward out
when door is opened for servicing
TowelMate® Towel Rod Assembly — Consisting of a round Nylon Rod and (2) stainless steel Rod Screws for attachment,
is field replaceable. Stainless steel Stop Screws (2) lock TowelMate Rod assembly in place. To retrofit TowelMate into existing
installed units manufactured prior to Feb. 2021, order TowelMate Accessory Bobrick Model No. 369-130.
OPERATION:
Paper towel dispenser accommodates C-fold and multifold paper towels without adjustment or use of adapters. Door-swing
limiter prevent damage to washroom accessories and walls.
INSTALLATION:
Provide framed rough wall opening 11-1/2" wide x 17-1/4" high (290 x 440mm). Minimum recessed depth required from
finish face of wall is 3-3/4" (95mm). Allow clearance for construction features that may protrude into rough wall opening
from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits in wall. Mount cabinet with
shims between framing and cabinet at all points indicated by an S, then secure unit with sheet-metal screws furnished by
manufacturer.
SPECIFICATION:
Recessed paper towel dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have
satin finish. Unit equipped with TowelMate consisting of a 90° return towel guide angle inside cabinet to prevent paper towels
from falling forward out when door is opened for servicing and a Nylon Rod across the center of the towel tray to dispense
paper towels one at a time Door shall be 18 gauge (1.2mm); have 9/16" (14mm) 90° return edges; be secured to cabinet with a
concealed, full-length stainless steel piano-hinge; and equipped with a stainless steel cable door-swing limiter and friction
catch. Paper towel dispenser shall be able to dispense 300 C-fold or 400 multifold paper towels without adjustment or adapters.
Recessed Paper Towel Dispenser shall be Model B-35903 of Bobrick Washroom Equipment, Inc., Clifton Park,
New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough,
Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United
Kingdom.
B-35903