Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. 370634-200 r6/22/18 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2018 by Bobrick Washroom Equipment, Inc.
OPERATION:
After coin is inserted in dispensing mechanism of patron's choice, pushing button dispenses boxed sanitary napkin
or tampon tube. Mechanical operations; no batteries or electricity required. Coin slot of each dispensing mechanism
is identified by a graphic symbol. Capacity: 20 sanitary napkins and 30 tampons. Coin slots are automatically
blocked with a red indicator when supply is depleted. Coin Return Push-Button cancels the selection and returns
coin into product tray. Wrong coins (penny, nickel, dime) by-pass mechanisms and drop into product tray. Vendor
dispenses sanitary napkin packages measuring 2-7/8" x 3/4" x 4-1/8" to 3-1/8" x 1-1/8" x 4-3/8" (73 x 19 x 105mm
to 80 x 29 x 111mm) and tampon tubes measuring 4-5/8" long x 9/16" diameter minimum to 5-1/8" long x 3/4"
diameter maximum (118 x 14 to 130 x 19mm).
INSTALLATION:
Provide framed rough wall opening 12-1/2" wide x 26-3/8" high (320 x 670mm). Minimum recessed depth
required to finish face of wall for semi recessing the unit is 3-7/8" (100mm). Allow clearance for construction
features that may protrude into opening from opposite wall. Coordinate with mechanical engineer to avoid pipes,
vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate
gap between flange and finish face of wall. Insert cabinet to wall depth available, then secure unit with four sheet-
metal screws, (not furnished), at points indicated by a S.
SPECIFICATION:
Semi-Recessed napkin/tampon vendor shall combine two dispensing mechanisms in one cabinet to provide sanitary
napkins and tampons at user’s option. Mechanical operations; no batteries or electricity required. Dispensing
mechanisms shall be pre-set at factory for (Free, 25¢ or Token) operation, but shall be convertible in
the field to allow the change of coin denomination without removing unit from wall. Door shall be furnished with
graphics indicating specified coin denomination. Unit shall be Type-304 stainless steel with all-welded construction;
exposed surfaces shall have #4 satin finish. Stainless steel skirt shall have satin finish and have 90° return on all
edges. Door shall be 18 gauge (1.2mm); have flat door design with 90° return edges; conceals flange; be secured
to cabinet with a concealed, full-length stainless steel piano hinge; and equipped with two tumbler locks keyed
like other Bobrick washroom accessories. Vendor product selection and coin return pushbutton-operation shall be
certified ADA-ABA, ICC/ANSI A117.1 complaint by third party (certification available on request) for operation
with one hand with less than 5 pounds of force (22.2 N) without tight grasping, pinching or twisting of the wrist.
Push-Button coin return shall cancel selection and return coin into product tray. Wrong coins (penny, nickel, dime)
shall by-pass mechanisms and drop into product tray. Product tray shall be impact-resistant PC-ABS plastic and
provide easy access to dispensed product. Coin Box shall be equipped with a tumbler lock that is keyed differently
than door locks. Unit shall not carry brand-name advertising.
Semi-Recessed Napkin/Tampon Vendor shall be Model (insert model number) of
Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles,
California; Bobrick Washroom Equipment Company, Scarborough Ontario; Bobrick Washroom
Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.