Specification Sheet

ManualsBrandsBobrick ManualsWaste ReceptaclesBobrick ConturaSeries® Recessed Waste Receptacle with LinerMate

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 10/9/14 Printed in Canada

Technical Data

continued . . .

15-1/4''

390mm

Recessed Cabinet

10-3/8''

265mm

15/16''

25mm

27-3/4''

705mm

1/4''

5mm

Ty p.

10-3/8''

265mm

17-1/4''

440mm

1-15/16''

50mm

Removable

LinerMate

20-7/8''

530mm

4-15/16''

125mm

1/8''

5mm

2-3/4''

70mm

2-9/16''

65mm

Ty p.

14-3/4''

375mm

Ty p.

25-7/8''

655mm

2-7/8''

70mm

Ty p.

3-7/8''

100mm

Finish Face of Wall

Recommended Mounting Height Off Floor

For Universal / Accessible Design

41'' to 45'' 1040 to 1145mm

Removable

Front Panel

MATERIALS:

Cabinet — 18-8, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces have satin-ﬁnish.

Flange — 18-8, type-304, 22-gauge (0.8mm) stainless steel with satin-ﬁnish. Drawn, one-piece, seamless construction. Radius on

corners and return edges complement side edges of waste receptacle.

Waste Receptacle — 18-8, type-304, 20-gauge (0.91mm) stainless steel with satin-ﬁnish. Formed, one-piece, seamless

construction. Removable front panel has same degree of arc as other Bobrick ConturaSeries washroom accessories. Top edge

hemmed for safe handling. Radius on side edges of waste receptacle complement other ConturaSeries accessories. Secured to

cabinet with two keyholes over studs on bottom and two tamper-resistant setscrews on top. Capacity: 12.8-gal. (48.3-L).

LinerMate Trash Liner Holder — Unit equipped with LinerMate to facilitate installation and removal of disposable trash

liners and retains liner inside waste receptacle. LinerMate trash liner holder is fabricated with a molded plastic bag holder

sleeve and a 20-gauge (0.91mm) stainless steel, U-shaped support strap; riveted construction. Bag holder shall have an arc at

front and same shape as inside of waste receptacle area.

OPERATION:

To insert disposable plastic trash bag, lift LinerMate bag holder up and forward and rest over edge of waste receptacle front

panel with the bottom notches of LinerMate engaged on top front edge of receptacle. Place plastic trash bag inside LinerMate

and fold plastic bag over LinerMate sleeve. Tie a knot in the corner of the bag, then place LinerMate with plastic trash bag

back into receptacle. To empty, gather disposable plastic trash bag from LinerMate bag holder sleeve and lift bag up. Front of

waste receptacle panel is removable for cleaning cabinet interior.

Rough Wall Opening

15-7/8" (405mm) wide

26-1/4" (665mm) high

4" (100mm) minimum

recessed depth

ConturaSeries

RECESSED

WASTE RECEPTACLE

WITH LINERMATE

B-43644

Summary of content (2 pages)

PAGE 1
ConturaSeries® RECESSED WASTE RECEPTACLE WITH LINERMATE® Technical Data B-43644 15-1/4'' 390mm Recessed Cabinet Finish Face of Wall 3-7/8'' 10-3/8'' 100mm 265mm 2-7/8'' S S 70mm Removable Front Panel Typ. S 25-7/8'' 655mm S S S 27-3/4'' 20-7/8'' 705mm 530mm 14-3/4'' Removable LinerMate 1/4'' Typ. S S 5mm Typ. 375mm S 17-1/4'' 440mm 10-3/8'' 265mm S S S 1-15/16'' 2-9/16'' 2-3/4'' 50mm 1/8'' 4-15/16'' 70mm 65mm Typ.
PAGE 2
INSTALLATION: Provide framed rough wall opening 15-7/8" wide x 26-1/4" high (405 x 665mm). Minimum recessed depth required to finish face of wall is 4" (100mm). Allow clearance for construction features that may protrude into rough wall opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall.