Specification Sheet

ManualsBrandsBobrick ManualsSoap DispensersBobrick 50 Fluid Ounce Wall Mounted Soap Dispenser

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/30/15 Printed in U.S.A.

Technical Data

continued . . .

BOBRIC K

Latches

3-3/4''

95mm

5/8''

16mm

3/16''

5mm

100mm

Swing-Up

Lid

Finish Face of Wall

3-13/16''

95mm

15/16''

24mm

Keyhole

Slot Mounting

Holes (2)

Container

BOBRIC K

5-15/16''

150mm

2-31/32''

75mm

8-1/16''

205mm

Push Button

Valve

Recommended Mounting Height Off Floor

For Universal / Accessibe Design

51'' 1295mm

7/16''

11mm

MATERIAL:

Valve — Durable, high-impact grey ABS push button and spout with high-gloss ﬁnish on exposed surfaces. Soap head-holding

capsule valve. Stainless steel spring. U-packing seal and duckbill.

Container — Durable, impact-resistant grey polymer with high-gloss ﬁnish on exposed surfaces. Equipped with a concealed

locking device to secure lid; keyed like other Bobrick washroom accessories. Front of container has same degree of arc as

front of lid and other Bobrick MatrixSeries washroom accessories. Radius on corners and edges of container complement

corners and edges of lid and other MatrixSeries accessories. Capacity: 50-ﬂ oz (1.5-L).

Lid — Durable, impact-resistant grey polymer with high-gloss ﬁnish on exposed surfaces. Front of lid has same degree of

arc as front of container and other Bobrick MatrixSeries washroom accessories. Radius on corners, edges and top of lid

complement corners and edges of container and other MatrixSeries accessories.

OPERATION:

Corrosion-resistant valve dispenses commercially marketed all-purpose hand soaps. Valve is operable with one hand, without

tight grasping, pinching, or twisting of the wrist, and with less than 5 pounds of force (22.2 N) to comply with accessible design

guidelines (including ADAAG in U.S.A.).

MatrixSeries™

SURFACE-MOUNTED

SOAP DISPENSER

Patented

B-5050

Summary of content (2 pages)

PAGE 1
Technical Data MatrixSeries™ SURFACE-MOUNTED SOAP DISPENSER B-5050 Finish Face of Wall 3-3/4'' Swing-Up Lid 15/16'' 95mm Latches 7/16'' 3-13/16'' 24mm 11mm 95mm S 5/8'' Keyhole Slot Mounting Holes (2) ICKK BBOO BBRRIC 8-1/16'' 16mm Container 205mm Push Button Valve 3/16'' 5mm S Patented 4" 2-31/32'' 75mm 51'' 1295mm SS Recommended Mounting Height Off Floor For Universal / Accessibe Design S 100mm S 5-15/16'' 150mm MATERIAL: Valve — Durable, high-impact grey ABS push button and
PAGE 2
INSTALLATION: Provide (3) #10 x 1-1/2" (4.8 x 38mm) sheet-metal mounting screws to mount the container on wall at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts.