Specification Sheet

continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 08/09/13
S/D
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2013 by Bobrick Washroom Equipment, Inc.
Technical Data
14-7/16''
365mm
5-15/16''
150mm
11-7/8''
300mm
18''
455mm
2-1/4''
55mm
Dia.
Bolt Circle
1-1/8''
30mm
2-1/4''
55mm
S
S
S
S
Base Plate
with Spring
Guide Bracket
Finish Face of Floor
Support
Bracket
15-3/8''
390mm
4-3/8''
110mm
1-3/8''
35mm
5-1/2''
140mm
Finish Face of Wall
15-13/16''
400mm
Mounting
Flange (2)
Concealed
Wall Backing
to Comply with
Local Building Codes
Not Furnished
by Bobrick
*Consult local building codes
S
S
S
S
9-3/8''
240mm
7-1/4''
185mm
3-1/16''
75mm
11''
280mm
Universal/Accessible Design
Recommended
Mounting Height
*17'' to 19''
430 to 485mm
MATERIALS:
Seat — One-piece, 5/16" (8mm) thick, solidly fused plastic laminate with matte-finish melamine surfaces, ivory-colored face
sheets, and black phenolic-resin core that are integrally bonded — cannot delaminate. Integral slots for water drainage. Secured
to frame with stainless steel carriage bolts and acorn nuts.
Frame — 18-8, type-304, stainless steel with satin finish. 16-gauge (1.6mm), 1-1/4" (30mm) square tubing and 18 -gauge
(1.2mm), 1" (25mm) diameter seamless tubing.
Mounting Flanges (2) — 18-8, type-304, 3/16" (5mm) thick stainless steel with satin finish. 3" (75mm) diameter with three
mounting screw holes.
Baseplate — 18-8, type-304, heavy-gauge stainless steel.
Spring — 17-7, type-301, 24-gauge (0.6mm) stainless steel. Spot-welded to baseplate.
Guide Bracket — 18-8, type-304, 16-gauge (1.6mm) stainless steel with satin finish.
SOLID PHENOLIC
FOLDING
SHOWER/DRESSING
AREA SEAT
B-5191