Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/30/15 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Technical Data
4''
100mm
10-3/4''
275mm
Towel Retainers
Towe l Tr a y
12-3/4''
325mm
Mounting Tabs (4)
10-7/8''
275mm
1/4''
6mm
11-5/16''
285mm
6''
150mm
4-1/8''
105mm
Recommended Mounting Height Off Floor
For Universal / Accessible Design
34'' 865mm
6''
150mm
When
Towe l Tr a y
Fully Loaded
MATERIALS:
Flange — 18-8, type-304, 22-gauge (0.8mm) satin finish stainless steel. 1/4" (6mm) 90° return for maximum rigidity.
Paper Towel Dispenser — 18-8, type-304, 22-gauge (0.8mm) satin finish stainless steel. All-welded construction. Equipped
with two hinged towel retainers and a spring-loaded towel tray. Capacity: 300 C-fold or multifold paper towels.
OPERATION:
Paper towel dispenser accommodates C-fold and multifold paper towels without adjustment or adapters. Patented push‑through
design allows loading from the top by pushing towels downward into dispenser through the two hinged towel retainers.
Designer's Notes: Housing below countertop to conceal paper towel dispenser is not included with unit — must be furnished
by others. Paper towel dispenser may be mounted in vertical surfaces of countertop also, including aprons, skirts, or front of
cabinets.
INSTALLATION:
Unit is designed for installation in countertop. Mount unit through a cutout specially ordered from countertop manufacturer or
field cut. Dimensions of cutout are to be 12-1/4" wide x 4-1/2" high (310 x 115mm). Adjustable mounting tabs accommodate
mounting thicknesses from 3/4" to 1-1/2" (19 to 38mm). For complete installation instructions, see Form No. 526-69, packed
with each shipment; also available in advance on request.
NOTE: 17" (430mm) minimum clearance below mounting surface is required to allow for full extension of fully loaded towel
tray.
SPECIFICATION:
Paper towel dispenser for mounting in countertops shall be type-304 stainless steel with all-welded construction; exposed
surfaces shall have satin finish. Flange shall have 1/4" (6mm) 90° return. Paper towel dispenser shall be equipped with two
hinged towel retainers and spring-loaded towel tray; capacity shall be 300 C-fold or multifold paper towels.
Countertop-Mounted Paper Towel Dispenser shall be Model B-526 of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson, Tennessee; and Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
Rough Countertop Cutout
12-1/4" (310mm) wide
4-1/2" (115mm) high
3/4" to 1-1/2" (19 to 38mm) mounting thickness
17" (430mm) minimum clearance below mounting surface
TrimLineSeries™
COUNTERTOP PAPER
TOWEL DISPENSER
B-526