Specification Sheet
Technical Data
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 8/27/15
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2015 by Bobrick Washroom Equipment, Inc.
Finish Face of Wall
S
S
27mm
1-1/16''
49mm
1-15/16''
Dia.
13mm
1/2''
33mm
1-5/16''
Flange Cover
Post
19mm
3/4''
Dia.
13mm
1/2''
Hook Pin
Mounting Flange
33mm
1-5/16''
COAT HOOK
B-542
B-5426
MATERIAL:
Post — 18-8, type-304, 19mm (3/4") diameter, solid stainless steel rod. Post and Concealed Mounting Threaded Flange are
machined as one piece.
Hook Pin — 18-8, type-304, 6.4mm diameter (1/4"), solid stainless steel rod with thread to screw into Post.
Concealed Mounting Threaded Flange — 18-8, type-304, 5.6mm (7/32") thick, stainless steel plate with thread on outside
edge for fastening cover. 46mm (1-13/16") outside diameter with two holes for attachment to wall.
Threaded Flange Cover — 18-8, type-304, 1.4mm (17-gauge), machined stainless steel. 49mm (1-15/16") diameter 13mm
(1/2") deep. Cover fastens over mounting flange to conceal mounting screws.
INSTALLATION:
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal
screws (not furnished), or provide 3mm (1/8'') toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished)
can be secured.
SPECIFICATION:
Coat Hook shall be type-304 stainless steel with ________________ (insert one satin finish or bright polished) finish. Coat Hook
shall have 19mm (3/4") diameter Post with 6.4mm (1/4") diameter Hook Pin. Concealed mounting flange shall be 5.6mm
(7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two screw holes for attachment and
thread on outside edge to fasten cover. Threaded flange cover shall be 1.4mm (17-gauge) stainless steel, 49mm (1-15/16")
diameter and shall fasten over mounting flange to conceal mounting screws. Post and mounting flange are to be machined as
one piece.
Coat Hook shall be Model _____________ (insert Model number) of Bobrick Washroom Equipment, Inc., Clifton
Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarbor-
ough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited,
United Kingdom.
B-542 Satin-finish stainless steel
B-5426 Bright Polished stainless steel
Specify Model Required: