Installation Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 8/10/18 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2018 by Bobrick Washroom Equipment, Inc.
Technical Data
Finish Face of Wall
1-7/8''
50mm
1-7/8''
50mm
5''
125mm
Mounting Clamp
Countersunk
Mounting
Holes (4)
12-5/16''
315mm
11-3/16''
285mm
6-1/8''
155mm
9/16''
14mm
Typ.
Specify Model Required:
Model B-697 Bright polished stainless steel
Model B-6977 Satin-finish stainless steel
MATERIALS:
Shell and Flange — 18-8, Type-304, 22-gauge (0.8mm) stainless steel. Drawn, one-piece, seamless construction with four
countersunk mounting holes.
Support Posts (4) — Heavy-duty cast zamak with chrome-plated finish.
Mounting Bracket — Plated-steel mounting clamp attaches to back of unit with four sheet-metal screws for installation in stud
walls or countertop aprons.
Spindles (2) — Chrome-plated plastic equipped with heavy-duty internal springs.
Designer's Note: Theft-resistant toilet tissue spindles, which are removable only with special key provided, are available as an
optional accessory - part no. 283-604.
INSTALLATION:
Provide framed rough opening 11-3/4" wide x 5-1/4" high (300 x 135mm). Minimum recessed depth required from finish face
of wall or apron is 3-3/8" (85mm).
For installation in stud walls or countertop aprons without backing, loosely attach mounting clamp to back of unit with
sheet-metal mounting screws. Insert into rough opening. Adjust mounting clamp so it grips surface inside rough opening.
Secure in place by tightening four sheet-metal mounting screws.
For installation in stud walls or countertop aprons with backing, discard mounting clamp furnished with unit. Insert unit only
into rough opening and secure with sheet-metal screws furnished. Backing must comply with local building codes.
SPECIFICATION:
Recessed dual-roll toilet tissue dispenser shall be Type-304, 22-gauge (0.8mm) stainless steel with __________ (insert one:
bright polished or satin) finish. Shell and flange shall be drawn, one-piece, seamless construction. Unit shall be furnished with
plated-steel mounting clamp for stud walls and countertop aprons.
c
Spindles shall be chrome-plated plastic with heavy-duty
internal springs.
c
To specify theft-resistant spindles as an optional accessory, add to specification: Theft-resistant toilet tissue spindles shall be
removable only with special key provided.
Recessed Dual-Roll Toilet Tissue Dispenser shall be Model __________ (insert model number) of Bobrick
Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick
Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and
Bobrick Washroom Equipment Limited, United Kingdom.
Rough Opening
11-3/4" (300mm) wide
5-1/4" (135mm) high
3-3/8" (85mm) minimum
recessed depth
RECESSED DUAL‑ROLL
TOILET TISSUE DISPENSER
(FOR STUD WALLS OR COUNTERTOP APRONS)
B‑697
B‑6977