Specification Sheet
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/06 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2006 by Bobrick Washroom Equipment, Inc.
Technical Data
12-3/8''
315mm
4-/18''
105mm
Ty p.
6-3/16''
155mm
Spindles (2)
S
Finish Face of Wall
2-3/4''
70mm
3-1/16''
80mm
Hoods (2)
S
2''
50mm
Recomended Mounting Height off the floor
for Accessible Design
22
''
560mm
Specify Model Required:
Model B-6999 Bright polished stainless steel
Model B-69997 Satin-finish stainless steel
MATERIALS:
Shell and Flange — 18-8, type-304, 22-gauge (0.8mm) stainless steel. Drawn, one-piece, seamless construction with four coun-
tersunk mounting holes.
Support Posts (4) — Heavy-duty cast zamak with chrome-plated finish.
Hoods (2) — 18-8, type-304, 18-gauge (1.2mm) stainless steel. Hoods hinged to shell.
Spindles (2) — Chrome-plated plastic equipped with heavy-duty internal springs.
Designer's Note: Theft-resistant toilet tissue spindles, which are removable only with special key provided, are available as an
optional accessory. To specify, add suffix .60 to model number. Example: B-6999.60.
INSTALLATION:
Mount unit on wall or partition with four sheet-metal screws, furnished by manufacturer, at points indicated by an S.
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts,
and washers.
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8"
(3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Surface-mounted dual-roll toilet tissue dispenser shall be type-304 stainless steel with __________ (insert one: bright polished
or satin) finish. Shell and flange shall be 22 gauge (6.8mm) and have drawn, one-piece, seamless construction. Unit shall be
equipped with 18-gauge (1.2mm) hoods hinged to shell. *Spindles shall be chrome-plated plastic with heavy-duty internal
springs.
*To specify theft-resistant spindles as an optional accessory, add to specification: Theft-resistant toilet tissue spindles shall be
removable only with special key provided.
Surface-Mounted Toilet Tissue Dispenser With Hoods shall be Model _______________ (insert model number)
of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California;
Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd.,
Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
SURFACE-MOUNTED
DOUBLE-ROLL
TOILET TISSUE DISPENSER
WITH HOODS
B-6999
B-69997