Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 8/02/16
S/A, R/*
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2016 by Bobrick Washroom Equipment, Inc.
Technical Data
Optional
Optional
S
S
S
S
S
7-3/8''
185mm
Paper Towel
Feed Wheel
Cabinet
S
S
Lock & Key
2-1/2''
65mm
12-7/16''
315mm
10-3/4''
275mm
7-5/8''
195mm
13/16''
20mm
9-1/8''
230mm
12-1/4''
310mm
Ty p.
7-3/8''
185mm
Ty p.
1-1/2''
40mm
Ty p.
Finish Face of Wall
Door
15-11/16''
400mm
2-3/8''
60mm
S
Recommended Mounting Height Off Floor
67'' to 74'' 1700 to 1880mm
Recommended Mounting Height Off Floor for Accessible Design
51'' 1295mm
S
S
Optional
PULL DOWN WITH TWO HANDS
BOBRICK
IF NO
TOWEL
TURN
KNOB
SURFACE MOUNTED
ROLL-PAPER-TOWEL
DISPENSER
MATERIALS:
Door and Housing — Durable, high-impact resin materials. Door is translucent dark grey with high-gloss finish on exposed surfaces and is
secured to light grey Housing with stainless steel hinge pins at bottom and keyed lock at top. Door may be opened with removable or perma-
nent keys provided. Additional “permanent” snap-in key supplied for use in non-vandal-prone installations.
Roll-Paper-Towel Mechanism — Durable, high-impact resin materials. Accepts standard-core rolls up to 8" (205mm) wide, 8" (205mm)
diameter. Dispenses one 12" (305mm) length of towel per pull. Accommodates up to 3-1/2" (90mm) diameter stub roll with automatic transfer
to full roll.
OPERATION:
Touch-Free pull towel dispensing mechanism dispenses one 12" (300mm) length of towel per pull and operates smoothly and quietly. User
only touches the paper. Exterior paper towel feed wheel available for use when filling dispenser and for user to advance paper should it
become necessary to feed paper through dispenser. Automatic transfer dispenses stub roll before new roll is dispensed. When stub roll is
depleted, advancement of paper towel feed wheel allows the main roll to start dispensing without the need to open the dispenser. Dispenser
accommodates up to 8" (205mm) wide, 8" (205mm) diameter, non-perforated paper towel rolls and dispenses with less than 5 pounds of force
(22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.).
INSTALLATION:
Mount unit on wall with four sheet-metal screws, furnished by manufacturer, at points indicated by an S. Optional mounting screw loca-
tions available, at installer’s discretion. Mounting template available on exterior of carton end. For plaster or drywall construction, provide
concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For other wall surfaces, use wall anchors,
furnished by manufacturer, for use with sheet metal screws, or provide 1/8" (3mm) toggle bolts or expansion shields (not furnished) for use
with machine screws.
SPECIFICATION:
Surface-mounted roll-paper-towel dispenser shall have durable, high-impact, dark translucent grey resin door with high-gloss finish on exposed
surfaces and durable, high-impact, light grey resin housing with matte finish. Door shall be secured to housing with two stainless steel hinge
pins and keyed lock. Door shall have lock which is opened with removable or permanent key. Towel mechanism accommodates up to 8"
(205mm) wide, 8" (205mm) diameter, non-perforated paper towel rolls. Touch-Free pull towel mechanism dispenses one 12" (305mm) length
of towel per pull. User only touches the paper. Automatic transfer shall dispense stub roll up to 3-1/2" (90mm) diameter before new roll is
dispensed. Equipped with paper towel feed wheel for use in filling the dispenser, for user to advance paper should it become necessary to feed
paper through dispenser. Paper towels are dispensed with pull force of less than 5 pounds (22.2 N) to comply with accessible design guidelines
(including ADAAG in U.S.A.).
Surface-Mounted Roll-Paper-Towel Dispenser shall be Model B-72860 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick
Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
B-72860