Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 12/22/16
R/B, S/H
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2016 by Bobrick Washroom Equipment, Inc.
Technical Data
6''
150mm
3-7/8''
100mm
2-1/8''
55mm
1''
25mm
Maximum
Mounting
Thickness
2-1/16''
50mm
Dia.
8-1/4''
210mm
6-1/8''
155mm
3-1/4''
85mm
Dia.
Lavatory or
Countertop
MATERIALS:
Piston, Spout, and Top Cover — Type-304 stainless steel with bright polished fi nish.
Cover Spacer — Rigid, impact-resistant polyester.
Escutcheon — Chrome-plated, high-impact-resistant ABS with bright polished fi nish. Concealed locking mechanism.
Body and Shank — High-impact-resistant plastic.
Valve — ABS cylinder. Stainless steel spring. U-packing seal and duckbills.
Container — Translucent, shatter-resistant polyethylene. Capacity: 20-fl oz (0.6-L).
OPERATION:
Press piston down to dispense commercially marketed all purpose hand soaps. Vandal-resistant spout can rotate 360° without damage
to unit. Escutcheon locks to body with concealed locking mechanism that is opened with special key provided. To fi ll from top, unlock
cover and remove piston, spout, and supply-tube assembly. Unit may also be fi lled by removing container from below lavatory.
Designer's Note: Bobrick liquid soap dispensers are designed to dispense commercially marketed all purpose hand soaps including
liquid and lotion soaps and synthetic detergents.
INSTALLATION:
Unit is designed for installation in 1" (25mm) diameter hole in porcelain-enameled steel, cast-iron or vitreous-china lavatories, as well as
in countertops adjacent to lavatories. Unit may be mounted in unused faucet hole or through special hole requisitioned when lavatory
is ordered from manufacturer (specify punching location). Shank accommodates maximum 1" (25mm) mounting thickness and can be
cut in the fi eld. Clearance required for container diameter is 3-5/16" (85mm).
SPECIFICATION:
Lavatory-mounted soap dispenser shall dispense commercially marketed all purpose hand soaps, non-iodine based soaps and do not
use alcohol based sensitizers. Piston and spout assembly shall be Type-304 stainless steel with bright polished fi nish. Escutcheon shall
lock to body with concealed locking mechanism that is opened only with special key provided. Spout shall rotate 360° without damage
to valve mechanism. Piston, spout, and supply-tube assembly shall be removable from top for fi lling and maintenance. Valve shall be
equipped with plastic cylinder, stainless steel spring, U-packing seal, and duckbills. Shank shall accommodate mounting thicknesses up
to 1" (25mm). Translucent, shatter-resistant polyethylene container shall have a capacity of 20-fl oz (0.6-L).
Lavatory-Mounted Soap Dispenser shall be Model B-82216 of Bobrick Washroom Equipment, Inc., Clifton Park, New
York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario;
Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom.
LAVATORY-MOUNTED
SOAP DISPENSER
B-82216