Specification Sheet

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. B-8263-200 r6/29/17 Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2017 by Bobrick Washroom Equipment, Inc.
INSTALLATION:
Unit is designed for installation in 15/16" to 1-1/4" (24 to 32mm) diameter hole in porcelain-enameled steel, cast iron
or vitreous-china lavatories, as well as in countertops adjacent to lavatories. Unit may be mounted in unused faucet hole
or through special hole requisitioned when lavatory is ordered from manufacturer (specify punching location). Shank
accommodates maximum 2" (50mm) mounting thickness. Clearance required for soap refill bottle and motor housing is 5"
(125mm) for the 27-fl oz (800ml) soap refill and 5-½" (140mm) diameter for 54-fl oz (1600ml) soap refill and 11-5/8" (295mm)
minimum depth for height of 27-fl oz of soap refill bottle and motor housing and 13-5/8" (345mm) minimum depth for height of
5-fl oz. (1600ml) soap refill bottle and motor housing. Place 4 "D" Cell Batteries (included in Model B-8263.18 only) into battery
pack. An optional single 6V AC adapter to replace the battery pack is available, order Part No. 826-20.
SPECIFICATION:
Automatic Lavatory-Mounted Foam Soap Dispenser shall dispense controlled amount (0.8ml) of Hand Soap with Moisturizers
or Free 'n Clean Soap or Hand Soap. Spout cover assembly to be Bright Polished chrome plated plastic. Meets accessible
design standards. Unit shall have blinking LED indicators to show low soap level and low battery life. Shank shall
accommodate mounting thicknesses up to 2" (50mm). Translucent, shatter-resistant polyethylene soap refill (800ml soap refill
included in model B-8263.18 only) shall have capacities of 27-fl oz (800ml) or 54-fl oz (1600ml).
Automatic Lavatory-Mounted Foam Soap Dispenser shall be Model B-8263 of Bobrick Washroom Equipment,
Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment
Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom
Equipment Limited, United Kingdom.
Diameter of Bottle
and Motor
Clearance Below
Counter
27-fl oz.
800ml
5''
125mm
11-5/8''
295mm
54-fl oz.
1600ml
5-1/2''
140mm
13-5/8''
345mm