Installation Guide

The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Rev. 7/1/10
R/B, S/C
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions. © 2010 by Bobrick Washroom Equipment, Inc.
Technical Data
S
10-13/16"
275mm
7-1/2"
190mm
Door
S
S
S
3-15/16"
100mm
Finish Face of Wall
7-1/8"
180mm
Recommended Mounting Height Off Floor
58" to 62"
1475 to 1575mm
Recommended Mounting Height Off Floor
For Barrier-Free Design
47''
1195mm
3-1/2"
90mm
Knob Latch
2"
50mm
MATERIALS:
Cabinet — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. All-welded construction. Exposed surfaces
have satin finish. Towel tray has hemmed opening to dispense paper towels without tearing.
Door — 18-8 S, type-304, 22-gauge (0.8mm) stainless steel with satin finish. Secured to cabinet with a full-length stainless
steel piano-hinge. Equipped with a knob latch.
Optional: Order Bobrick Part No. 262-130 TowelMate™ available as on optional accessory. TowelMate accessory allows for
paper towels to dispense one at a time without bulging, sagging or falling through the towel tray opening. TowelMate fits
Gamco and most manufacturers' similar models.
OPERATION:
Unit dispenses C-fold and multifold paper towels 3-1/8" to 3-13/16" (79–97mm) deep. Slots in sides of cabinet indicate refill
time. Capacity: 200 C-fold or 275 multifold paper towels. To dispense narrower towels 2-1/2" to 3-1/8" (64–79mm) deep, order
optional TowelMate accessory Bobrick Part No. 262-130.
INSTALLATION:
Mount unit on wall with four #10 x 1-1/4" (4.8 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. For
plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-
metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8"
(3mm) toggle bolts or expansion bolts.
SPECIFICATION:
Surface-mounted paper towel dispenser shall be type-304 stainless steel with all-welded construction; exposed surfaces shall
have satin finish. Door shall be secured to cabinet with a full-length stainless steel piano-hinge and equipped with a knob latch.
Paper towel tray shall have hemmed opening to dispense paper towels without tearing. Unit shall be capable of dispensing 200
C-fold or 275 multifold paper towel measuring 3-1/8" to 3-13/16" (79 to 97mm) deep. Narrower paper towels 2-1/2" to 3-1/8"
(65 to 79mm) deep may be efficiently dispensed with the use of an optional TowelMate accessory, Bobrick Part No. 262-130.
TowelMate accessory allows for paper towels to dispense one at a time without bulging, sagging or falling through the towel
tray opening.
Surface-Mounted Paper Towel Dispenser shall be Model B-2621 of Bobrick Washroom Equipment, Inc.,
Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company,
Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment
Limited, United Kingdom.
SURFACE-MOUNTED
PAPER TOWEL
DISPENSER
B-2621