Specification Sheet

KOALA KARE PRODUCTS

KB200 HORIZONTAL WALL MOUNTED

BABY CHANGING STATION

KB200-00 CREAM

KB200-01 GREY

KB200-05 WHITE GRANITE

KB200-11 EARTH

”

(894 mm)

”

(500 mm)

”

(461 mm)

42¼”

(1,073 mm)

to floor

3¾”

(95 mm)

16” (406 mm)

between holes

Floor

KB200 TECHNICAL DATA SHEET

BW HALFTONE

PAGE 1
KOALA KARE PRODUCTS KB200 HORIZONTAL WALL MOUNTED BABY CHANGING STATION KB200-00 CREAM KB200-01 GREY KB200-05 WHITE GRANITE KB200-11 EARTH 3¾” (95 mm) 16” (406 mm) between holes 19 11/16” (500 mm) 18 5/32” (461 mm) 42¼” (1,073 mm) to floor 353/16” (894 mm) Floor KB200 TECHNICAL DATA SHEET
PAGE 2
19 11/16” (489 mm) liner dispenser dimensions when attached 16” (406 mm) 5½” (140 mm) 4½” (114 mm) 42¼” (1073 mm) from top mounting hole to floor 3¾” (95 mm) Floor 35 3/16” (894 mm) 22¼” (565 mm) 44” (1118 mm) from floor to handle area located on both sides of unit.
PAGE 3
MATERIALS: FDA approved injection-molded polypropylene with Microban® antimicrobial additive embedded into the bed surface. Reinforced steel-on-steel hinge mechanism and metal mounting chassis with mounting hardware included. Labelled usage instructions and safety messages in four languages. Optional Braille label available. Contoured changing surface area is 450 sq. in (2903 sq. cm) and comes complete with nylon safety strap and bag hooks.
PAGE 4
INSTALLATION: To ensure proper installation and compliance to building codes, it is recommended that a qualified person or carpenter perform the installation of the unit. The unit must be properly installed onto a permanent wall that is capable of supporting significant weight and can accommodate the supplied installation hardware. The Koala Baby Changing Station meets ADA regulations when properly installed.