Use and Care Manual

bObi can accidentally run over her adapter cord and get it tangled in her brush. Help
bObi avoid this by hiding the cord behind the station and securing it between the
charging station and the wall.
Sync bObi with the charging station
If bObi can’t nd her charging station, the station and bObi are out of sync and you
need to sync up their coding. Follow these steps:
1. Bring bObi close to her charging station.
2. Disconnect the charging station from the adapter.
3. Switch bObi o by turning the power switch on bObi’s side OFF.
4. Plug the adapter into the charging station.
5. Use the Syncing Tool to press and hold the Sync button on back of the
charging station.
6. While holding the Sync button, turn bObi ON with the switch on her side.
7. bObi will emit a series of chirps to indicate the charging station has been
synchronized.
8. If you do not hear the chirps, turn bObi and the charging station OFF, dis-
connect the station from the adapter, and wait a few minutes before repeating
the process (restart from step 1).