Use and Care Manual

Installing the remote’s batteries
- Remove the battery cover on the back of the remote.
- Insert the batteries with the negative side toward the spring and the positive
side against the other connector.
- Reattach the cover.
Syncing bObi with the remote
If bObi isn’t responding to your commands on the remote, you may need to resyn-
chronize the remote with bObi. Follow these steps:
1. Switch bObi o by turning the power switch on bObi’s side ‘O’.
2. Press and hold the OK button on the remote.
3. While holding down the OK button, turn the Power switch on bObi’s side
to ON.
4. bObi will chirp several times to indicate that the remote has been synchro-
nized.
5. If you do not hear bObi chirp, repeat the process.
Using the direction buttons to steer bObi with the Remote
If you want to turn bObi or drive her backwards, hold down the applicable direction
button until she is in the correct direction. When you release the button, bObi will
move forward. If you press the back button, bObi will move backwards as long as
the button is depressed and will stop when it is released.