Use and Care Manual

The Stop button in the center of the direction buttons will interrupt bObi’s cleaning
cycle and stop her until you press another button.
Be Careful! Do not drive bObi in reverse towards edges or she could fall.
The edge detection system only works when bObi is moving forward.
Choosing bObi’s Cleaning Speed with the Remote
bObi’s default setting is fast mode, which maximizes the area she covers while
cleaning. You can slow bObi down for a deeper, more thorough cleaning.
Press the ‘speed’ button on the remote control to toggle between fast or slow
modes. The fan on the lower left side of the remote screen indicates slow mode by
displaying only four blades and fast mode by displaying full blades.