Use and Care Manual
Programming bObi’s cleaning schedule
Follow the steps bellow to schedule bObi’s cleaning time and day(s):
1. Turn bObi ON and keep her close to the remote.
2. Press SCH TIME on the remote.
3. The rst (hour) digit on the Scheduled Time will start ashing. Use the FWD
and BACK buttons to adjust the time to the desired cleaning time.
4. Use the LEFT and RIGHT buttons to scroll left and right between the digits
and change hour and minute settings.
5. Press SCH TIME again to save the scheduled cleaning time.
6. To choose the days, press SCH TIME again.
7. Press LEFT until the frame around the rst day of the week, number 1,
begins to ash.
8. Press the FWD and BACK buttons to scroll through days of the week.
9. To turn cleaning on for a certain day, press OK when the frame around that
day is ashing. A day is selected when the number that represents that day is
underlined. Keep pressing FWD and BACK to move between the days and press
OK to turn cleaning on or o for each day.
10. Press SCH TIME when you are nished selecting days. bObi will conrm
she has received her new schedule by chirping each time a new schedule is
programmed.
11. If bObi is meant to work at the same time every day, just press the ALL/
NONE button after setting her cleaning time schedule while the day of the week
frame is ashing. All days will be underlined, which means bObi will start her work
at the scheduled time every day. Press SCH TIME to save.
12. The ALL/NONE button can also be used to reset bObi’s scheduled cleaning
days. Remember, pressing ALL/NONE then SCH TIME when bObi has a preset
schedule turns o cleaning on all days.