Use and Care Manual

Sensors
Cleaning bObi’s sensors
Dirt and dust on the bottom and side sensors can reduce bObi’s performance.
Regular cleaning of the sensors ensures that bObi keeps working at her best. Use
a soft cloth or a cotton swab slightly moistened with cold water or alcohol to wipe
bObi’s surface, around and underneath her belly, especially on the bumper and oor
detection sensors on bObi’s bottom.
Blindfold Stickers
Dark colored carpets or certain patterns can seem like an edge to bObi’s infrared
sensors. If you notice that bObi stops with error 1 on your carpet, you can try
‘blindfolding’ her by covering the 4 oor detection sensors underneath her. The oor
detection sensors are on the front and sides of bObi’s bottom when you turn her
around. Just make sure bObi is not getting anywhere near stairs or sharp edges
when blindfolded or she can fall.
Storing bObi
bObi should not be left unused with her power switched ON for more than one
week. If you are not using bObi for an extended period of time, switch her OFF.
Then, unplug the charging station, remove bObi’s battery, and store everything in a
dry place at room temperature.