Use and Care Manual

Likely cause(s) for bObi’s trouble/error codes
When bObi faces an uncomfortable situation, she will try to notify you of the issue.
If she ever stops in the middle of her cleaning with the error sign (Err) lit on her
remote, read the two digit code on the remote’s display. Here are the codes, the
likely cause for the trouble, and what to do in case of each code. Additionally, bObi
is equipped with a self-checkup feature to allow you to test the functionality of its
various parts and sensors. If the problem is not resolved, please contact us at sup-
[e-mail].
Not a fan of reading? For a complete archive of bObi’s how-to videos, troubleshoot-
ing and checkup guides, go to http://owners.bobsweep.com or scan this smart-
phone barcode:
Error Code 001
bObi can not see! Her ground/edge detecting sensors (4 sensors on front and sides
of bObi’s bottom) are blocked or are dirty.
What to do:
What kind of ooring are you using bObi on? On dark carpets or rugs use bObi’s
blindfold stickers as instructed to resolve the error.
If the ooring is not dark or patterned, turn bObi around and wipe sensors with a
clean, dry cloth until they are completely clean.