Use and Care Manual

Error Code 003
If bObi’s battery is 100% empty, she won’t be able to charge using her station; and
may show error 003 on her remote.
What to do:
Plug bObi directly into the adapter using the port below her ON/OFF switch. bObi’s
screen will ash and turn on, and she will make a short chirping sound. Let bObi sit
for about 30 minutes then unplug her. Turn the side switch to OFF then back ON
and put her on her station to complete charging.
Error Code 004
Error code 004 pertains to an issue with bObi’s left & right wheels, or a possibility
of jamming in her main rubber brush. The issue may simply be a jam in one or both
wheels, or bObi may have an electronic problem that is keeping her right wheel from
moving freely.
What to do:
Check bObi’s wheels for jamming. Open the wheels and use compressed air to
remove dust or debris. Check bObi’s main brush and remove dirt, dust, or entangle-
ment. If error 004 happens on a soft or plush carpet, remove bObi’s rubber brush
and restart.
If this does not solve the problem and bObi still shows an error, perform a checkup
test to see how the wheels and brushes respond to the test.
Contact support if needed.