Use and Care Manual

Test the battery
While in test mode 0001, press LEFT on the remote. The number will change to
0002. In this mode, the main 4-digit number on the screen reads the voltage of
bObi’s battery in millivolts (mv). Under normal circumstances this number ranges be-
tween 1400 and 1600. If the number on the screen shows as 0000, it means bObi’s
battery is not working or has a loose connection. Open the battery compartment
and check the battery.
Test bObi’s wall detecting sensors
After testing the oor detection sensors, press RIGHT on the remote. The number
0100 will appear on the test mode indicator. Use a piece of paper, a roll of paper
towels, or a white at surface to imitate a wall in front of bObi. Drag it from the left
side of the bumper around to the right side until you reach the power switch. Num-
bers 1 to 5 on the remote will become underlined one by one as you do this. Ignore
the numbers on the large 4-digit number in the middle of the screen.