Use and Care Manual

Test the charging station
The nal part of the checkup tests bObi’s ability to charge. To begin this test, press
RIGHT on the remote so that bObi enters test mode 0400. The main 4-digit number
in the center of the remote’s screen should show 0000 when bObi is not on her
charging station. Place bObi on the charging station, and a number between 0400
and 0800 will appear in place of the zeroes.
When you are nished with the test, turn bObi’s side power button OFF to leave the
checkup mode. When you switch it back ON, bObi will return to her normal working
mode.
If everything responds properly, bObi’s internal parts are working correctly. Contact
our helpful support team at [e-mail] if you have a question, or
need help with bObi.