Use and Care Manual

Setting up bObi’s blOck
Place blOck on the edge of the area you want to keep bObi away from. The power
button indicates blOck’s back surface, and signals do not come through the back
of the blOck, so be sure the back of the blOck faces away from the area you are
restricting. For example, after turning the blOck ON, place blOck with its back facing
a wall or an edge of a doorway like the image below. bObi will not move past the
blOck and to the right hand side of the room.
bObi blOck creates a cone-shaped boundry, so the barrier gradually gets wider.