Use and Care Manual

1. Remove the battery cover on
the back of the remote.
2. Insert the batteries with the
negative side toward the spring
and the positive side against the
other connector.
3. Reattach the cover.
Installing the remote’s batteries
Syncing bObi with her remote
If bObi isn’t responding to your commands
on the remote, you may need to resyn-
chronize it with bObi. Follow these steps:
1. Set the power switch on bObi’s side
to OFF.
2. Press and hold the OK button on the
remote.
3. While holding down the OK button,
turn the power switch on bObi’s side
ON.
4. bObi will chirp several times to indi-
cate that her remote has been synchro-
nized.
5. If you do not hear bObi chirp, repeat
the process.