Use and Care Manual

Sensors
Cleaning bObi’s sensors
Dirt and dust on bObi’s bottom and side
sensors can reduce her performance.
Regularly cleaning them ensures
that bObi keeps working at her best.
Moisten a soft cloth or cotton swab
with cold water or alcohol to wipe
atop, underneath, and around bObi’s
surfaces, especially on her bumper and
oor detection sensors located on her
underbelly.
Blindfold stickers
Dark-colored carpets and certain
patterns can seem like edges to bObi’s
infrared sensors. If bObi stops on your
carpet and displays error 1 (Er 01), try
“blindfolding” her sensors: use the white
rectangular blindfold stickers to cover
the 4 oor detection sensors underneath
her. These sensors are positioned on
the front and sides of bObi’s underbelly.
Once she is blindfolded, make sure
bObi does not travel near stairs or steep
edges as she will not detect them and
may fall.