OWNER ’ S MAN UAL bObi Pet
bObi Pet OW N E R ’ S MA N U A L Model NWP20800 Manual Version 2020.
Congratulations! Congratulations on your new intelligent floor cleaner! bObi is now at your service. To see bObi at her best, please read the Quick Start Guide and this manual thoroughly. Welcome to the bObsweep family and Happy Sweeping! If you have any questions or concerns, feel free to contact our helpful support team at support@bobsweep.com or 1-888-549-8847. Our business hours are Monday – Friday, 9 a.m. – 5 p.m. Pacific Time.
Important Safety Instructions Flip bObi’s power switch OFF and unplug her from the outlet when she is not in use and before conducting maintenance. bObi is not intended for use by persons (including children) with reduced physical or mental capabilities, or lack of experience and knowledge, unless under the close supervision of a person responsible for their safety. Leaks from the battery cells can occur under extreme usage or temperature conditions. If the liquid gets on the skin, wash quickly with water.
Declaration of Conformity Warranty This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.
Table of Contents 74 Troubleshooting 75. 77. 79. 81. 83. Edge Sensors Brushes Power System Wheels Dustbin 4 38 86 Getting Started 5. 7. 9. 14. Box Contents bObi’s Anatomy Get to Know bObi Get bObi Started Cleaning Schedule 39. Setting the Current Time and Day 41. Setting the Cleaning Schedule 43. Auto-Resume Mode Home Checkup Test 87. Putting bObi in Checkup Mode 89. Home Checkup Test Steps 22 46 94 Charging 23. Charging bObi 25. Charging Station 27. Syncing the Charging Station Maintenance 47.
Getting Started Let’s start at the very beginning. We’ll walk you through the basics and help you get bObi started for the very first time.
Quick Start Getting Started Box Contents 1 3 2 18 Bob comes with the following items. You can purchase replacement parts and accessories at www.bobsweep.com/shop.
Quick Start Getting Started Top View Touch Sensors Wall Sensors Transmitter Charging Indicator 1 2 bObi’s Anatomy Bottom View Edge Sensors Front Wheel UV Lamp Battery Side Brush 3 Charging Inlet Rubber Brush R L Left Wheel Right Wheel Main Brush Cover Buttons 1 2 3 Dustbin GO! - Sends bObi to clean. JUICE - Sends bObi to her charging station. WAFFLE - Sends bObi to clean localized mess.
Quick Start Getting Started Get to Know bObi Who is bObi? bObi is an autonomous robotic vacuum cleaner, at your service! She can vacuum, sweep, and mop all at the same time — and at the end of her cleaning session, she automatically returns to her charging station for a power nap. Set bObi to clean on a schedule and she’ll clean on her own even when you’re not around.
Quick Start Getting Started Get to Know bObi Navigating Difficult Obstacles Unique Furniture Dark-Colored Carpet Shag Carpet Inclines bObi is designed to maneuver around furniture of most shapes and sizes, but she may find it difficult to clean under chairs with narrow legs or around furniture that is too low for her sensors to detect.
Quick Start Getting Started Get bObi Started: Step 1: Install bObi’s Battery Parts You’ll Need: Battery 1. Remove the 2 screws on the battery cover using a Phillips head screwdriver. R 13 bObi will be ready to clean in just 3 easy steps. Phillips Head Screwdriver 2. Plug the battery into its socket, then slide the battery into the compartment. L 3. Replace the screws on the battery cover.
Quick Start Getting Started Get bObi Started: Step 2: Charge bObi Allow bObi to fully charge before using her for the first time. bObi will be ready to clean in just 3 easy steps. Parts You’ll Need: Charging Adapter Charging Station When bObi Is Charging: The charging indicator’s center light will flash to indicate that she is charging. When bObi Is Fully Charged: The center light remains still. 15 1.
Quick Start Getting Started Get bObi Started: Step 3: Prepare bObi’s Remote Setup bObi’s remote so that she can respond to its commands. Parts You’ll Need: bObi will be ready to clean in just 3 easy steps. FullCommand™ Remote AAA Batteries x2 (not included) Quick Tip: Make sure to remove the clear plastic covering on bObi’s power switch. Insert 2 x AAA batteries to turn on bObi’s remote.
Quick Start Getting Started Get bObi Started: bObi will be ready to clean in just 3 easy steps. bObi is now ready to clean! OR 1. Flip bObi power switch ON. 19 2. Press the GO! button on bObi’s cover or FullCommand™ remote, and she will clean on her default Deep Clean mode. Quick Tip: Make sure to remove the clear plastic covering on the power switch.
Charging bObi automatically returns to her charging station when low on battery. To maximize bObi’s chance of finding her station, it’s best to place it in an easily accessible location with plenty of space around it. If bObi continues to have trouble finding her station, you may need to sync it.
Quick Start Charging Charging bObi Charging bObi Charging bObi Using the Charging Station Place bObi on her charging station with the metal nodes on her front resting against the plates on her station. Make sure the station is plugged in and the station’s power light is on. Charging bObi Using the Adapter Plug the charging adapter directly into the inlet on bObi’s side. When bObi Is Charging: The charging indicator’s center light will flash to indicate that she is charging.
Quick Start Charging Charging Station Charging Station Position the charging station against a wall on a hard, flat surface. Make sure there is at least 10 feet (3 m) of open space to the front and 2 feet (0.6 m) of open space to the sides of the station. 2 feet (0.6 m) 2 feet (0.6 m) 10 feet (3 m) 25 Conserving bObi’s Battery Standby Mode To conserve bObi’s battery, turn her power switch OFF and remove her from her charging station when she is not in use.
Quick Start Charging Syncing the Charging Station bObi is smart and will automatically search for her charging station when her battery power reaches 15%. You will need to sync the station if bObi is having trouble finding it. Parts You’ll Need: Charging 1. Plug the charging adapter into the side of the charging station. The station’s power light will turn on. Quick Tip: ! 27 Syncing the Charging Station Adapter Charging Station 2.
FullCommand™ Remote You can set bObi’s cleaning schedule, select her cleaning modes, and control her movements all from her FullCommand™ remote.
Quick Start FullCommand™ Remote Remote Buttons Remote Buttons 1 2 3 4 5 6 GO! Sends bObi to clean. Juice Sends bObi to her charging station. Waffle Sends bObi to clean a localized mess. Hi/Bye Puts bObi in and out of standby mode. OK Confirms time selection or synchroniz es the remote. Speed Slows bObi down for an intensive clean or speeds her up to her default speed. 31 7 8 9 10 11 12 CUR Time Sets the current time and day. SCH Time Sets bObi’s cleaning schedule.
Quick Start FullCommand™ Remote Syncing the Remote bObi must be synced to her FullCommand™ remote before she is able to obey its commands. Parts You’ll Need: 1. Hold down the OK button on bObi’s remote. Syncing the Remote FullCommand™ Remote AAA Batteries x2 (not included) 2. While still holding down the OK button, flip bObi’s power switch ON. bObi will chirp twice to let you know the sync was successful. If bObi does not chirp, repeat the process.
Quick Start FullCommand™ Remote Navigating bObi Navigating bObi Hold down a navigational button on the remote to keep bObi moving in the desired direction. Release the button when you are done manually driving bObi. Quick Tip: bObi’s edge sensors are located along her front, not along her back. Do not reverse bObi towards edges, as she will fall.
Cleaning Schedule bObi can be programmed to clean at the same time on multiple days of the week through her FullCommand™ remote. The remote works on a 24hour clock, so adjust accordingly.
Quick StartSchedule Cleaning Setting the Current Time and Day bObi can be programmed to clean at the same time on multiple days of the week through her FullCommand™ remote. To set bObi’s cleaning schedule, you must first set the current time and day on her remote. Make sure bObi is turned ON and synced to her remote before proceeding.
Quick StartSchedule Cleaning Setting the Cleaning Schedule bObi can be programmed to clean at the same time on multiple days of the week through her FullCommand™ remote. After setting the current time and day on bObi’s remote, you may set her cleaning schedule. Make sure bObi is turned ON and synced to her remote before proceeding.
Quick StartSchedule Cleaning Auto-Resume Mode On auto-resume mode, bObi leaves her charging station after every recharge to perform “backto-back” cleaning cycles. To enable auto-resume, make sure bObi is turned ON and synced to her FullCommand™ remote. Parts You’ll Need: Auto-Resume Mode FullCommand™ Remote AAA Batteries x2 (not included) Enabling Auto-Resume 1. Press the SCH TIME 2. Press the STOP button and “FFGO” (finish 3.
Maintenance To maximize bObi’s efficiency, it is best to clean her dustbin, filters, brushes, and sensors about once a week.
Quick Start Maintenance Dustbin Dustbin Parts You’ll Need: Cleaning Tool To maximize bObi’s efficiency, it is best to empty her dustbin about once a week, or about once every 6 cleaning cycles. Emptying bObi’s Dustbin Quick Tips: Never fill the dustbin with water or any other liquid with the vacuum motor attached. 1. Hold down the eject button on the back of 2. Pull up the two color clips on either side of 3. Wipe the dustbin with a dry cloth or brush 4.
Quick Start Maintenance Filter Filter Parts You’ll Need: Cleaning Tool To maximize bObi’s efficiency, it is best to clean her filter about once a week and replace it about once every 6 months. The filter is located inside the dustbin. These filter captures fine particles and prevents them from escaping the dustbin. Cleaning bObi’s Filter Quick Tip: Do not wash bObi’s filter with water or any other liquid. 1. Push the button on bObi’s back and slide 2.
Quick Start Maintenance Main Brush bObi uses a dual brush cleaning system. It is recommended that you open and clean bObi’s main brushes once a week. Parts You’ll Need: Main Brush Cleaning Tool Cleaning bObi’s Main Brushes Quick Tip: You may use scissors to cut away entanglements of hair, or tweezers to unclog the notches inside bObi. 1. Press the latch on the side of the main 2. Use the cleaning tool to remove debris from 3.
Quick Start Maintenance Side Brush To maximize bObi’s efficiency, it is best to clean her side brush about once a week. Parts You’ll Need: Philips Head Screwdriver Side Brush Cleaning Tool Cleaning bObi’s Side Brush Quick Tip: You may use scissors to cut away entanglements of hair, or tweezers to unclog the notches inside bObi. 1. Remove the screw on the side brush using a Philips head screwdriver. 53 2.
Quick Start Maintenance Sensors Sensors Parts You’ll Need: Cloth (not included) To maximize bObi’s efficiency, it is best to clean her sensors about once a week. bObi’s obstacle/wall sensors are located along her bumper; her edge sensors are located along the front of her underside. Cleaning bObi’s Sensors 1. Wipe the obstacle/wall and edge sensors with a soft cloth slightly dampened with cold water or alcohol.
Quick Start Maintenance Front Wheel Front Wheel Parts You’ll Need: Flat Head Screwdriver (not included) To maximize bObi’s efficiency, it is best to clean her front wheel about once a week. Cleaning bObi’s Front Wheel 1. Pop the front wheel out of its socket using a flat head screwdriver. 57 2. Clean the wheel and the socket then replace the wheel and press until locked in place.
Parts and Accessories bObi’s additional features include blOck, a mop attachment, edge sensors, and a lithium-ion battery. You can use bObi blOck™ to create digital barriers that bObi will not cross. You can deactivate bObi’s edge sensors so she is better able to clean darkcolored carpet.
Quick Start Parts and Accessories blOck™ bObi blOck™ You can use bObi blOck™ to create digital barriers that bObi will not cross. bObi blOck™ emits a 10 foot barrier from its front window. bObi blOck™ Buttons 1 2 Power Button Turns front barrier on or off. SYNC Button Syncs bObi blOck™. 1 2 Power Light Slowly Blinking Light The barrier is turned on. Rapidly Blinking Light bObi blOck™ is low on battery.
Quick Start Parts and Accessories Syncing bObi blOck™ As with bObi’s remote, you will need to sync bObi blOck™ before using it for the first time. Parts You’ll Need: bObi Syncing blOck™ AA Batteries x4 (not included) blOck™ 1. Press the 2. Hold down the SYNC button while at the Quick Tip: You can sync multiple blOck™ accessories with bObi. power button. Wait for the red light on the front side of bObi blOck™ to start slowly blinking before proceeding.
Quick Start Parts and Accessories Using bObi blOck™ You can use bObi blOck™ to create digital barriers that bObi will not cross. bObi blOck™ emits a 10 foot barrier from its front side. Parts You’ll Need: bObi blOck™ Using blOck™ AA Batteries x4 (not included) Make sure bObi blOck™ is synced before proceeding. Quick Tip: The power lights will blink rapidly when bObi blOck™ is low on battery. To conserve battery, turn bObi blOck™ off when it is not in use. 1.
Quick Start Parts and Accessories Mop Mop bObi’s mop attachment allows her to mop as she vacuums and sweeps. Quick Tip: Do not let bObi climb onto carpet or rugs when she is mopping. You may use blOck to keep her away from carpet or rugs. Installing bObi’s Mop Attachment 1. Dampen bObi’s mopping cloth with water or cleaning solution before placing it on the mop attachment. 2. Align the prongs of the mop attachment between bObi’s wheels and press down, then lock in place.
Quick Start Parts and Accessories Edge Sensors If bObi repeatedly backs up or displays an error message (Er 01) while cleaning dark-colored carpet, then you’ll need to deactivate the edge sensors. Make sure bObi’s is turned ON before proceeding. Quick Tip: When the edge sensors are deactivated, bObi is unable to detect stairs or sharp drops. You may use blOck to keep her away from these obstacles.
Quick Start Parts and Accessories Battery On her default Deep Clean mode, bObi’s battery lasts about 45 – 90 minutes per charge. bObi’s battery has a 2-year warranty. Replacement batteries can be purchased at www.bobsweep.com/shop. Battery Parts You’ll Need: Phillips Head Screwdriver Quick Tips: To conserve bObi’s battery, flip her power switch OFF and remove her from her charging station when she is not in use.
If the problems persist, please contact our helpful support team at support@bobsweep.com or 1-888-549-8847. Our business hours are Monday – Friday, 9 a.m. – 5 p.m. Pacific Time. Troubleshooting If bObi is having a problem with one of her parts, an error message will light up on her remote screen.
Quick Start Troubleshooting Edge Sensors: Er 01 Troubleshooting: Edge Sensors Parts You’ll Need: Cloth (not included) What to do: 1. Wipe the edge sensors with a soft cloth slightly dampened with cold water or alcohol. 2. If problems persist, deactivate the edge sensors using bObi’s blindfold stickers. 75 When the edge sensors are deactivated, bObi is unable to detect stairs or sharp drops. You may use bObi blOck™ to keep her away from these obstacles.
Quick Start Troubleshooting Brushes: Er 02 Parts You’ll Need: Troubleshooting: Brushes Compressed Air (not included) Cleaning Tool What to do: 1. Remove and clean bObi’s brushes and brush holders. 2. Clean the brush compartment from end to end using Bob’s cleaning tool and compressed air. 77 bObi’s main brush is not designed to clean shag carpet or rugs with long fibers.
Quick Start Troubleshooting Troubleshooting: Power System Power System: Er 03 Parts You’ll Need: Charging Adapter Charging Station Phillips Head Screwdriver What to do: 1. Place bObi on her charging station and allow her to fully charge. 79 2. If bObi is unable to charge on her station, charge her directly by plugging the charging adapter into the inlet above her power switch. 3. If bObi still has trouble charging, try reconnecting the battery.
Quick Start Troubleshooting Wheels: Er 04 Parts You’ll Need: Troubleshooting: Wheels Cleaning Tool Compressed Air (not included) What to do: 1. Use the cleaning tool to remove debris jamming bObi’s wheels. 2. Remove the two screws around each wheel and use compressed air to remove debris inside the wheel compartments.
Quick Start Troubleshooting Dustbin: Er 05 Parts You’ll Need: Troubleshooting: Dustbin Cleaning Tool Compressed Air (not included) What to do: 1. Remove bObi’s dustbin and empty it. 2. Gently wipe the two metal connectors on the bottom of the dustbin with a dry cloth. If the two metal connectors seem damaged, they may need to be replaced. 3. Lastly, clean the metal contact points inside bObi where the dustbin is inserted.
Home Checkup Test If bObi is not performing as well as she should, you can diagnose the problem with a simple home checkup test.
Quick Start Home Checkup Test Putting bObi in Checkup Mode Putting bObi in Checkup Mode When In Checkup Mode: Value Indicator Checkup Indicator 1. Flip bObi’s power switch OFF. 2. While holding down the OK button on bObi’s remote, flip bObi’s power switch ON, then simultaneously press WAFFLE and JUICE on bObi’s cover. bObi will chirp 3 times to let you know she is now in checkup mode. You may release the OK button. Do not press any additional buttons on bObi or her remote.
Quick Start Home Checkup Test Step 1: 0000 Edge and Wheel Sensors Step 2: 0001 Firmware Version Home Checkup Test Step 3: 0002 Battery Step 4: 0100 Wall Sensors With bObi on the ground look at the remote’s screen. Press LEFT on the remote. The Checkup Indicator changes to 0001. Press LEFT on the remote and Checkup Indicator changes to 0002. Press RGHT on the remote and the Checkup Indicator changes to 0100. The 4 bars below numbers 1 to 4 should be underlined.
Quick Start Home Checkup Test Step 5: (0100 continued) Touch Sensors 80 touch sensors surround bObi’s bumper. Press on any of the touch sensors on the left side of bObi’s bumper, and number 6 at the top of the remote should be underlined. Step 6: 0200 blOck and Battery Life Unplug the charging station so its signal does not interfere with this test. Press RGHT on the remote and the Checkup Indicator changes to 0200.
FAQs Still have questions that we haven’t answered? Contact our helpful support team at support@bobsweep.com or 1-888-549-8847. Our business hours are Monday – Friday, 9 a.m. – 5 p.m. Pacific Time.
Quick Start FAQs My bObi won’t turn on no matter what I do. First, make sure bObi’s power switch is turned ON. The power switch is located on bObi’s side. If bObi’s power switch is turned ON and she is not responding to her cover buttons, then her battery has likely drained too low for him to operate. Place bObi on her charging station and allow her to fully charge. Why is bObi beeping? bObi beeps periodically while in standby mode.
Quick Start FAQs What is bObi’s runtime? How long should bObi’s battery last? The exact runtime depends on the age of the battery and the type of surface bObis is cleaning; the younger the battery and the smoother the cleaning surface, the longer the runtime. The normal runtime range for bObi is 45 – 75 minutes. bObi’s battery comes with a 2-year warranty and should last for several years. To conserve bObi’s battery, do not leave her on her charging station for more than 5 days.
End User Agreement 100
IMPORTANT - READ BEFORE USING. Do not use the robot (“Bobsweep”) accompanying this license agreement (“Agreement”) until you have carefully read and agreed to the following terms and conditions. By using the Bobsweep, you agree to the terms of this End User License Agreement (“EULA”) and any amendment or addenda accompanying this Agreement. If you do not agree to the terms of this EULA, you may not use the Bobsweep.
USER SUBMISSIONS: You agree that any material, information or other communication, including all data, images, sounds, text, and other things embodied therein, that you transmit or post to a Bobsweep website or provide to Bobsweep (“Communications”) will be considered non-confidential. Bobsweep will have no confidentiality obligations with respect to the Communications.
