Bob PetHair Vision OWNER ’S M A NUA L Model WVP56020 Manual Version 2019.3.
Congratulations! Congratulations on your new intelligent floor cleaner! Bob is now at your service. To see Bob at his best, please read the Quick Start Guide and this manual thoroughly. Welcome to the bObsweep family and Happy Sweeping! If you have any questions or concerns, feel free to contact our helpful support team at support@bobsweep.com or 1-888-549-8847. Business Hours: • Monday – Friday, 9 a.m. – 5 p.m.
Table of Contents 1 General Safety Instructions Declaration of Conformity Warranty Contact Us 3 Anatomy 5 Box Contents Top View Bottom View Button Guide Charging Station Wet Mop Attachment
6 bObsweep App 7 Bob’s First Clean 9 Troubleshooting My Resources Schedule & Control Shop Install Side Brushes Charge Download bObsweep App Let Bob Sweep 10 15 17 Maintenance Dustbin & Filters Brushes Sensors & Camera Window Front Wheel Battery Accessories Wet Mop Attachment NoSweep™ Stripes End User License Agreement
Important Safety Instructions • Power Bob OFF and remove him from a power source when you are not using him and before conducting maintenance. • Bob is not intended for use by persons (including children) with reduced physical or mental capabilities, or lack of experience and knowledge, unless under the close supervision of a person responsible for their safety. • Leaks from the battery cells can occur under extreme usage or temperature conditions. If the liquid gets on the skin, wash quickly with water.
Declaration of Conformity This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment.
Anatomy Top View Button VisiOn Camera Bottom View Charging Plates Front Wheel Left Side Brush Left Wheel Main Brush Edge Sensors Right Side Brush Battery Right Wheel Speaker Dustbin 3
Anatomy Button Guide Battery Short Press - Charge Long Press - Search for Wi-Fi Charging Station Play Short Press - Start/Stop Long Press - Power On/Off Wet Mop Attachment* Opening Inlet Charging Nodes Reservoir *Sold separately. Included in accessories bundle.
Box Contents 5 Bob PetHair Vision Charging Adapter Charging Station Cleaning Tool Side Brushes (4) Filters (2) Wet Mop Attachment* Microfiber Mopping Cloths (2)* NoSweep™ Stripes* *Sold separately. Included in accessories bundle.
6
Bob’s First Clean 1. Install Side Brushes Press down to lock the left (L) and right (R) side brushes onto Bob. 2. Charge Place Bob on his station and allow him to fully charge. . 2 feet (0.6 m) 2 feet (0.6 m) 10 feet (3 m) 3. Download bObsweep App Download the bObsweep app for your iOS or Android device. Create your account and connect your bot. 4. Let Bob Sweep! When done, Bob is ready to sweep! Clear away any clutter or wires and press the button.
Bob’s First Clean Before Starting Remove the protective pieces from Bob’s bumper and charging station. Charging Indicator Low Battery: The button rapidly blinks blue. Finding Station: The button shines blue. Charging: The button slowly blinks blue. Fully Charged: Both buttons shine white.
Troubleshooting Whenever Bob runs into trouble, he will stop and his buttons will shine red. Check the bObsweep app for further details. Trouble Solution Left Wheel Left wheel is jammed. Check for obstruction and clean. Right Wheel Right wheel is jammed. Check for obstruction and clean. Off Ground Wheels are off the ground. Place Bob back on the ground. Main Brush Main brush is jammed. Remove and clean. Side Brushes Side brushes are jammed. Remove and clean.
Maintenance Part Maintenance Frequency Replacement Frequency Dustbin Daily Filter Weekly Every 6 months Brushes Weekly Every 12 months Sensors Weekly Front Wheel Weekly Battery Every 12 – 24 months Dustbin & Filters 1. 3. Remove the dustbin. 2. Open the filter container and remove congestion. 4. Open the dustbin and dump its contents. Remove and dust the filters. Wipe the dustbin.
Maintenance Brushes 1. 3. 11 Pull up to remove the side brushes. Pinch the tabs on the main brush gate and lift. 2. 4. Remove debris from the brushes and brush sockets. Clean the main brush and all its components, including the brush gate and brush compartment.
Maintenance Sensors & Camera Window Important Note: Use a cloth to wipe the sensors and camera window. 1. 3. Wipe the edge and wall sensors. Wipe the metal connectors on the dustbin and wet mop attachment. 2. 4. Wipe the charging plates on Bob and the charging nodes on his station. Wipe the camera window.
Maintenance Front Wheel 1. 3. 13 Using a flat head screwdriver for leverage, grip the wheel firmly and pull. Clean the wheel and all its components, including the assembly and wheel socket. 2. 4. Once the wheel is removed, use the screwdriver to pry out the wheel assembly. Replace both parts when done. Push down to lock them into place.
Maintenance Battery Important Note: Power off Bob before replacing the battery. Press and hold the 1. Use a Phillips head screwdriver to open the battery compartment. 3. 2. button. Unplug the old battery and plug in your new one. Slide the new battery into Bob.
Accessories* Wet Mop Attachment Important Note: Use distilled water when operating in hard water areas. 1. Place the mopping cloth on the mop attachment. 3. 15 2. Open the tab and fill the reservoir with water. Remove the dustbin and insert the mop attachment. *Sold separately. Included in accessories bundle.
Accessories* Wet Mop Attachment Maintenace Important Note: The reservoir should be drained after use to avoid possible water damage. 1. 3. Remove the mop attachment. Tap any debris that may have collected inside the attachment. 2. 4. Pull open the tab and empty the reservoir. Wash the mopping cloth. Air-dry all parts when done. NoSweep™ Stripes Bob’s NoSweep™ stripes allow you to create boundaries Bob will not cross.
End User License Agreement IMPORTANT - READ BEFORE USING. Do not use the robot (“Bobsweep”) accompanying this license agreement (“Agreement”) until you have carefully read and agreed to the following terms and conditions. By using the Bobsweep, you agree to the terms of this End User License Agreement (“EULA”) and any amendment or addenda accompanying this Agreement. If you do not agree to the terms of this EULA, you may not use the Bobsweep.
or trademarks, (iv) shall prohibit disassembly and reverse engineering of the Bobsweep Software and the Bobsweep, (v) shall not publish reviews of Bobsweep products designated as beta without written permission from Bobsweep, and (vi) shall indemnify, hold harmless, and defend Bobsweep and its suppliers from and against any claims or lawsuits, including attorney’s fees, that arise or result from Your Software, including your use and your distribution.
PROHIBIT THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU UNAUTHORIZED USE: THE BOBSWEEP SOFTWARE AND THE BOBSWEEP ARE NOT DESIGNED, INTENDED, OR AUTHORIZED FOR USE IN ANY AERONAUTICAL, NUCLEAR, MEDICAL, LIFE SAVING OR LIFE SUSTAINING SYSTEMS, OR FOR ANY OTHER APPLICATION IN WHICH THE USE OF THE BOBSWEEP SOFTWARE OR THE BOBSWEEP COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.
referred to in any proceeding concerning this Agreement. Further, no understanding contained in this Agreement shall be modified, altered or amended, except by a writing signed by the party against whom enforcement is sought. ARBITRATION: All disputes relating to this Agreement (excepting any dispute relating to intellectual property rights) shall be subject to final and binding arbitration, with the losing party paying all costs of arbitration.