Use and Care Manual

Place the side brush over the empty
socket on Dustin. Press down to lock.
Dustin’s First Clean Dustin’s First Clean
Before Starting
Remove protective pieces from Dustin’s
bumper and charging station.
Install Dustin’s Side Brush
Install Dustin’s side brush to help him reach the corners and edges of rooms.
Parts You’ll Need: Side Brush
Power Dustin ON
Press and hold the GO button until the screen lights up.
If you are not going to use Dustin for a
while, you can place him on Low Power
Standby mode (LPS mode). To do so, place
Dustin on his charging station. Press and
hold the CHARGE button on Dustin for 5
seconds. You’ll hear “low power mode”,
conrming Dustin is in LPS mode. To exit
this mode, press GO on Dustin while he’s
on the charging station, or remove him from
the station.
Storing Dustin
If you are not using Dustin for an extended
period of time (over a month), power him
OFF, remove his battery, and unplug his
charging station. Store everything in a dry
room, away from direct sunlight or extreme
temperature.
Important Note: In this mode, Dustin is
ofine and the bObsweep App is not able
to connect to Dustin. Furthermore, any
scheduled cleaning will be paused.
12
11