Use and Care Manual

Sensors

1. Wipe the edge and wall sensors. 2. Wipe the charging nodes on Dustin and

his station.

3. Wipe the metal connectors on the

dustbin and wet mop attachment.

4. Wipe the top and the area around the

SLAM LiDAR.

Use a soft cotton cloth to wipe the sensors.

Maintenance

Important Note: Dustin’s SLAM LiDAR is a sensitive sensor. Do not apply force, insert objects, or

adjust the SLAM LiDAR. Do not sit on Dustin or place items on top of him.

Front Wheel

Maintenance

1. Using a at head screwdriver for leverage,

grip the wheel rmly and pull.

2. Once the wheel is removed, use the

screwdriver to pry out the wheel assembly.

3. Clean the wheel and all its components,

including the assembly and wheel socket.

4. Replace both parts when done.

Push down to lock them into place.