Use and Care Manual

OR
16 17
Plug the charging adapter into the side
of the charging station. The station’s red
power light will turn on.
Place Junior on his charging station with
the metal plates on his underbelly sitting
on top of the nodes on his station.
Install Junior’s Side Brush
After installing Junior’s side brush, you must now set him to charge.
Charge Junior
1 2
Plug the charging adapter into Junior’s
side. Junior will chirp and start charging.
1
Before Junior’s first clean, you must install his side brush, which allows him to sweep
along corners, walls, and other hard-to-reach places.
To do this, you will need the following materials, all of which are included inside
Junior’s box: a side brush, a flat head screwdriver, and a short screw.
Flip Junior over onto a
flat surface. Place the
side brush over the
empty socket on Ju-
nior’s underside.
Secure Junior’s side brush
onto the socket using the
flat head screwdriver and
short screw.
You may use the additional
side brush and screws as
spares.
1 2 3