Operating Guide

Let Bob Charge
Before he is ready to clean, Bob must be
fully charged.
Turn Bob’s side power switch ON, and
his screen will light up. To charge Bob,
place him near his charging station and
press the CHARGE button.
If Bob can’t nd his charging station, he
needs to be synced with his station. See
page 20 for instructions.
If Bob’s screen does not light up when you ip his power switch ON, Bob’s battery
might be too drained for him to recognize his charging station — but don’t worry!
Simply unplug the adapter from the
charging station and instead plug
it directly into the inlet above Bob’s
ON/OFF switch to help him regain
consciousness.
The charging station’s memory can store the cleaning schedule and current time
for at least 8 hours without electricity. This will give you plenty of time to re-plug the
adapter back into the charging station after Bob comes to life.